5 hot cupboard door panels have different advantages and disadvantages

As the saying goes, see people first look at the face, look at the face first look at the eye. If this sentence is used on cabinets, it is equally appropriate - look at the cabinets and look at the doors first. The cabinet door can be said to represent the "face" of a cabinet. It can reflect both the value of the cabinet and the taste of the owner of the cabinet. However, in the current market, we can always hear: the name of the board that sounds like a refractory board, a tri-hydrin amine double-sided board, a crystal board, a paint board, and so on. The main function of the fire board is to prevent fire. What is the test board? Nowadays, there are five types of cabinet door panels that are relatively hot. They are: blister board, paint board, refractory board, melamine double-sided board, and solid wood board. Among these panels, what does the name of the plates represent what kind of door performance?

Before explaining the above issues, we must first look at the basic structure of a cabinet door. We can compare common cabinet door panels with a sandwich biscuit. The substrate of the door panel is the “sandwich” part of this “cookie”. It is the main part of the door panel. Today, the main substrate of the door panel on the market is particleboard and MDF. They can give a thick feel to the cabinet door, and the surface material of the door panel is obviously the “small biscuit” that covers the sandwich from both sides. It is the skin of the door panel and withstands various frictions, water, and heating of daily kitchen life. Other activities include various types of surface materials, including solid wood veneers, pvc films, and wood-based panels.

We made a survey on the materials of the five hot-selling cabinet doors in the market, comparing the characteristics, advantages and disadvantages of several types of door panels in the form of PK, allowing consumers to be more clear when buying cabinets.

One of PK players: Blister board

Plate construction: As the name implies, the blister board needs to be hot pressed on the surface of the substrate. Its base material is a density board, and the surface is formed by heat-pressing and squeezing the PVC veneer. The reason why the MDF board is selected instead of the chipboard is that the MDF board can be adapted to boring and milling on the surface without chipping. The chipboard is formed by pressing wood chips. If the surface is boring and milling, chipping will occur. Affect the quality of cabinet doors.

Advantages: rich colors, pure and pure color, not easy to crack deformation, wear resistance, heat resistance, stain resistance, fade resistance, can easily carry out daily cleaning and maintenance.

Disadvantages: As the density board is used as a substrate, it is mainly made of wood flour, which is poor in moisture resistance and will swell when it encounters water, which will affect its use. At the same time, since the material of the density board is wood powder, accessories such as cabinet door handles that need to be fixed on the door of the cabinet are difficult to be fixed on the door for a long time, and the stability is low.

PK player two: paint board

Plate construction: It is very similar to the blister board. The lacquer board needs to be painted on the surface of the substrate several times at high temperature. Only the density board can adapt to this process. Most of the lacquer boards are heated and dried in the drying room after painting, mainly through the paint treatment of the substrate door.

Advantages: bright color, a strong visual impact; easy to shape, very beautiful fashion; and waterproof performance, strong anti-pollution ability, cleaning and maintenance easier.

Disadvantages: As the density plate is used as a base material, it has the same moisture resistance and low stability as the blister plate. At present, China's baking lacquer technology still has certain flaws, and the quality of baking paint is worrying. At the same time, lacquerboard requires producers to have a high level of technology. In the production process, the scrap rate is higher than other door panels, and the price is high; The surface is only painted, very afraid of bumps and scratches, once the damage is difficult to repair, but to replace the whole; in the more smoke kitchen, test lacquer board prone to color, the old.

PK player three: refractory board

Plate structure: The substrate is mostly particle board, and the surface is fired board veneer. Fire board is made of silicon or calcium material as the main raw material, and a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives mixed by autoclave technology made of decorative plates.

Advantages: Extremely comprehensive performance, it is wear-resistant, high temperature resistant, scratch-resistant, anti-permeability, not easy to deformation and easy to clean, a wide range of color options, at the same time, the refractory board out of low-cost in other types of hot-selling door panels. Take up a large share in the market. It can be said that the refractory board is beautiful and practical, and is the most affordable door panel in the five hot cabinet door panels.

Disadvantages: In rare cases, refractory board encounters water for a long time and improper handling, there will be degumming, deformation, substrate expansion, etc., single-sided refractory board is not resistant to impact, easy to deform, only the inner side of the cabinet door After laminating with a refractory plate, the quality can be fully guaranteed. At the same time, because of the relatively low price, the refractory board has always been the first choice for cabinet doors in the middle and low grades, which makes people feel that the grades are not ideal.

PK player fourth: melamine double-sided plaque

Plate construction: The melamine board is the full name of melamine impregnated film coated wood-based panels. It is the paper with different colors or texture into melamine resin adhesive soaking, drying to a certain degree of curing after the pavement on the particle board, hot pressed.

Advantages: smooth surface, not easily deformed, bright color, wear-resistant, corrosion-resistant, optional texture, the door material price of this material is the lowest in the five hot cabinet door.

Disadvantages: Due to the facile manufacturing method, the quality of the board is very different, it is not easily discernible, the bending resistance and tensile strength are poor, and the scratching is difficult because of the fine texture of the surface.

PK player five: solid wood board

Plate structure: Solid wood cabinet door panel refers to the surface is solid wood, there are two kinds of substrate, one is a solid wood panel, the other is a density board.

Advantages: The effect is natural, the color is good, the shape is rich, and the classical meaning is strong, fully embodying the high grade of the cabinet.

Disadvantages: Solid wood panels are prone to deformation after use, cracking problems are almost unavoidable, and fire performance is also relatively unsatisfactory. However, due to the popularity of solid wood materials in various countries, more raw wood is needed, and the price is also the most expensive of the five hot-selling cabinet door panels.  

Cabinets Buy Cabinets Three Trees Lacquer Doors Prices Decorating Cabinets Doors Cabinets Doors Doors Kitchen Doors

Aluminum Window Frame Parts

Aluminum Window Frame Parts

Xingqiu Aluminum Co., Ltd. , http://www.fsdoorsprofile.com