Other Constructions SS Wire Rope Wire rope quality judgment:
5. The anti-corrosion ability of 316 Stainless Steel Wire Rope is stronger than that of 306 stainless steel wire rope, and the anti-corrosion ability of 306 is stronger than that of hot-dip galvanized steel wire rope. The quality of hot-dip galvanized steel wire rope is better than that of electro-galvanized steel wire rope; the quality of nylon plastic-Coated Steel Wire Rope is stronger than that of PE plastic-coated steel wire rope.
SS Wire Rope,SS Aircraft Cable,Construction Cable,Stainless Steel Wire Ropes Jiangsu Hongze Stainless Steel Wire Rope Co., Ltd , https://www.hzrope.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Analysis of the damage caused by fuel and shaft and bearing bush in lubricating oil Analysis of the damage caused by fuel oil in the shaft and bearing bush
After the fuel enters the crankcase, it will change the lubricating oil. The è ¡Ð§ æ¡£ æ¡£ è ¡Ð§ å€ å€ å€ å€ å€ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . By-products that occur after fuel incineration; after being brought into the poorly ventilated crankcase by the fuel; the sulfuric acid produced will form severe cavitation on the outer surface of the shaft. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The reason for the occurrence: the fuel supply of the fuel system is too large; the fuel injected into the incineration chamber cannot be completely incinerated, the intake air is blocked by the intake air; the fuel cannot be incinerated, the nozzle seal fails, the fuel enters the crankcase, and the fuel passage in the cylinder head There are blowholes or cracks in the air hole, the idling speed is too long; the engine temperature is low. The fuel can't be completely incinerated. The reason is: the cylinder seal is poorly sealed; the coolant enters the crankcase, the engine oil radiator is damaged; the oil and water mix, when lubricating There is water entering or filling port and the oil dip is poorly sealed; when flushing the car and raining, the water enters the crankcase, and there is water in the fuel entering the crankcase. So before each engine is started; be sure to check the oil level and oil quality of the lubricating oil. This is necessary to do
Recommend to friends comments close window Bearing related knowledge High-speed fine-angle touch ball bearing device analysis in comparison with the national standard: wheel bearing seal layout
INA deep groove ball bearing cylindrical hole radial bearing loading and unloading how to choose imported skf bearing tightening oil
This article links to http://
Please indicate China Bearing Network http://
Previous:Corrosion of metal valves, corrosion and protection of valve body Next:The reason for failure of sliding bearing (1)
1. Specific gravity. The diameter of the wire rope is the same, the heavier the specific gravity, the better the quality of the wire rope.
2. Steel wire rope core. The stronger the core of the wire rope, the heavier the specific gravity, the better the support for the outer strand of the wire rope, and the better the quality of the wire rope.
3. Materials. The material is the steel grade and strength. The higher the steel grade, the better the quality of the wire rope with higher strength.
4. After the rope is cut, the slightly loose quality is good, and the quality of the wire rope with a relatively long lay length is better than that with a short lay length.
Analysis of the damage caused by fuel oil in the shaft and bearing bush
Source: Bearing network time: 2018-06-15