Shape:Round, Square, Rectangle, Oval, etc.
Steel wire is one of the four varieties of steel plate, tube, shape and wire. It is a reprocessed product made by cold drawing hot-rolled Wire Rod. According to the section shape classification, mainly has the circle, the square, the rectangle, the triangle, the ellipse, the flat, the TRAPEZOID, the z shape and so on 0.1 mm, fine 0.1-0.5 mm, fine 0.5-1.5 mm, medium 1.5-3.0 mm, thick 3.0-6.0 mm, thick 6.0-8.0 mm, extra thick & GT; 8.0 mm; 390 MPA, low intensity 390 ~ 785 MPA, normal intensity 785 ~ 1225 MPA, high intensity 1225 ~ 1960 MPA, high intensity 1960 ~ 3135 MPA, Ultra High Intensity & GT; 3135 MPA; The general quality steel wire includes wire for welding Rod, nail making, net making, packing and printing, steel wire for cold heading forging, rivets and Screws, etc. , steel wire for electrical purposes includes special steel wire for the production of overhead communication lines and Aluminium conductor steel-reinforced cable wire, steel wire for the textile industry includes carding, heald 013, card clothing and needle wire, steel wire for the production of wire ropes and spokes, spring steel wire includes steel wire for springs and spring washers, for Harps and tyres, curtains and conveyor belts, structural steel wire for watch and clock industry, ball bearings, automatic machines for easy cutting, stainless steel wire includes stainless steel wire for each of the above purposes and surgical implant wire, resistance alloy wire for heater element and resistance element, tool wire including steel wire and shoe wire
Raw material selection, iron scale removal, drying Nantong Safe Yawl Import &Export Co.,Ltd , https://www.ntsyspring.com
Anti-static floor wax use method
Use wax water and proper wax pad to remove the original wax layer and clean the floor with clean water. After the floor is completely dry, drag the product evenly onto the floor with a clean wax and wait for about 30 minutes. After the wax layer is completely dry, apply a second layer of wax. Apply three to five layers of wax as required. Will use the remaining wax back to the original container; regular wax, can be used 1 part water to 1 anti-static floor wax drag the ground; daily maintenance, it is recommended to use PolyForte anti-static floor dust remover cleaning, or use Li-Fu Polyforte anti-static balance cleaner for polishing; spray grinding, 5 parts water can be used against 1 anti-static floor wax, with more than 1000 rotation speed polishing; 6, 0 °C above preservation.