Application of low friction performance of PTFE gasket

PTFE gaskets should not be lubricated due to the friction of some equipment, such as in the case where lubricating grease is dissolved by solvent, or in industries such as paper, pharmaceutical, food, textile, etc., it is necessary to avoid lubricant contamination. It makes the filling of PTFE material the most ideal material for mechanical equipment "target=_blank> mechanical parts without oil lubrication (direct load bearing). This is because the friction coefficient of this material is the lowest among the known solid materials.


PTFE gaskets have outstanding excellent comprehensive properties, high temperature resistance, corrosion resistance, non-stick, self-lubricating, excellent dielectric properties and low friction coefficient. Adding any filler that can withstand the sintering temperature of PTFE in PTFE can greatly improve its mechanical properties.


At the same time, maintain the other excellent properties of the PTFE gasket. Filled varieties include glass fiber, metal, metal oxide, graphite, molybdenum disulfide, carbon fiber, polyimide, EKONOL, etc., wear resistance, limit PV value can be increased by 1000 times. The depolymerization of polytetrafluoroethylene to produce 1 mol of tetrafluoroethylene requires only 171.38 kJ of energy. Therefore, at the time of pyrolysis, the polytetrafluoroethylene is mainly depolymerized into tetrafluoroethylene.


The weight loss rate (%) of the Teflon gasket at 260, 370, and 420 ° C was 1 × 10 - 4.4 × 10 -3 and 9 × 10 - 2 , respectively. It can be seen that polytetrafluoroethylene can be used at 260 ° C for a long time. Due to the highly toxic by-products such as fluorophosgene and perfluoroisobutylene, it is necessary to pay special attention to safety protection and prevent PTFE from contacting open flames.


The specific applications of PTFE gaskets include bearings for chemical equipment, papermaking machinery, agricultural machinery, piston rings, machine tool guides, and guide rings. They are widely used as bridges, tunnels, steel roof trusses, and large-scale civil engineering projects. Chemical pipelines, support slides for storage tanks, and as bridge supports and bridge swivels.


Good chemical resistance of PTFE gasket


PTFE gasket has excellent chemical stability, can be used as stuffing box gasket, pipe thread sealing raw material belt, raw material rope, packing, microporous diaphragm, microporous filter plate, lining device, pipe, membrane Box, liquid level floater, experimental instrument; communication satellite, coaxial transmission of TV transmission line, ultra-high frequency communication, winding of micro motor, control cable of thermal power plant and wire insulation of computer for double water cooling Water pipes, electrolysis cells in thermal power plants. Utilizing the low coefficient of friction of polytetrafluoroethylene, it is not sticky.


At the same time, in order to improve the wear resistance and creep resistance of PTFE gaskets, the manufacture of mechanical parts mostly uses filled PTFE, sealed bearings, piston rings, rollers, and intake heads.


The PTFE gasket has a low dielectric constant and dielectric loss over a wide frequency range, and has high breakdown voltage, volume resistivity, and arc resistance. Polytetrafluoroethylene is produced by radical polymerization of tetrafluoroethylene.


The industrial polymerization is carried out by stirring in the presence of a large amount of water to disperse the heat of reaction and to facilitate temperature control. The polymerization is generally carried out at 40 to 80 ° C under a pressure of 3 to 26 kgf/cm 2 , and an inorganic persulfate or an organic peroxide may be used as an initiator, or a redox initiation system may also be used.


Aramid packing


Scope of application: There are granular fluids and their media, steam, organic solutions, acids, alkalis, etc., which are applied to the sealing of machinery, pumps, valves, pipes, containers, etc. used in fluid conveying equipment.
Features: The filler has excellent lubricity and wear resistance. The most outstanding performance is high strength, high grinding capacity, good chemical resistance, high rebound, low cold flow and easy disassembly. It is especially suitable for dynamic sealing parts containing solid particle media.
Technical Parameters:
Temperature: -100 ° C ~ +300 ° C
Pressure: 35MPa
Chemical resistance: PH value 2-13


Pure PTFE packing oil-containing pure PTFE packing is specially treated by PTFE wire with low friction and suitable for dynamic sealing pump. Therefore, the packing is generally not recommended for use on high line speed pumps.
Oil-containing PTFE packing specifications:
3*3mm--50*50mm; special specifications or various non-standard products can be formulated according to customer requirements.
The main technical parameters of oily PTFE packing:
Pressure 10Mpa
Temperature (Temperature) 260 ° C
Ph range (PH range) 0~14
Linear speed 10 m / s m / s


Expanded graphite packing


The expanded graphite packing is woven by a flexible graphite wire. It has the advantages of good self-lubricity and thermal conductivity, small friction coefficient, strong versatility, good flexibility, high strength and protection for the shaft. According to different requirements, it can be reinforced with carbon fiber, glass fiber and other materials.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

leather tape measure

The easy-maintained PU material is soft to wrap the whole tape measure inside, protecting it from dirt and impact. The PU cover can also be customized by the color and stamped with your company logo. Too maintain consistency of design, the tape puller is seamed with the same PU material. As to the fiberglass tape, it bears two different measuring units on the different side, among which, one side measures in inch and the other in centimeter. The reinforced vinyl tape features high flexibility which allows itself to measure both flat and curvy surfaces. Durable soft tape is waterproof and stain resistant, so it is easy to keep clean for clear measurement. The tape can be customized on the tape scale(cm/inch only or both), tape length(60inch/150cm normally), tape color and logo printing. User-friendly retractable feature enable simple storage and effortless retraction.



Features

  1. User-friendly retract button---effortless retraction and easy storage
  2. Personalized PU cover with stamped company logo---ideal promotional gift
  3. Inch and metric 2-in-1 tape---free from conversions and waterproof (other customized tape patterns is available)
  4. ABS plastic case---strong and durable to protect the inner mechanism and the tape




About Material

The tape measure is made of ABS case coated in PU leatheror real leather, PVC coated fiberglass. All the materials are eco-friendly, which pass ROHS and EN-71 tests. The lead content is less than 5ppm.


About Case Color

Case colors can be customized according to pantone code.


About Custom Logo

Custom logo is available.
For 1-2colors logo, we will use silk printing
For full color logo, we will print it with heat transfer printing ,
And we also make normal sticker or epoxy plate logo sticker for single color or full color logo
For PU or real leather tape measure, we can make emboss logo


About Tape Colors

Standard tape colors are in white and black
We can make pink, green or other colors.
Full color design is available too.


About Tapeline Size

The standard length is 150cm/60inch and 100cm/40inches
We have longer one in length of 180cm/72inch and 200cm/79inch, and the maximum length is 214cm.

Tape width is 7.5mm.


Pu Tailor Clothing Tape Measure, Custom Pu Tape Measure, Cheap Tape Measure, PU Tape Measure, Promotional Gift

Wintape Measuring Tape Company , https://www.wintapetape.com