There are many kinds of protective gloves. In addition to chemical resistance, there are also anti-cutting, electrical insulation, waterproof, cold resistance, thermal radiation protection, fire retardant and other functions. It should be noted that the general acid and alkali resistant gloves are not the same as the chemical resistant protective gloves. So when needed, you should choose protective gloves that prevent all kinds of chemicals from penetrating.
The correct use of
Painting equipment spraying line robot does not move the method:
a. Check whether the robot has an alarm signal, and ask the professional maintenance personnel to solve the alarm signal according to the alarm signal;
b. Press the robot back to the origin to observe whether there is a return to the origin and normal state;
c. The servo motor motor head is loose and re-inserted;
d. Please inform the manufacturer for repair when the servo motor is faulty.
Http://
1. Check whether the gloves are damaged before each use
2. Wear protective gloves before handling harmful substances or operating dangerous procedures
3. Avoid exposure of pollutants and contact with the skin after removing the contaminated gloves
4. Contaminated gloves should be wrapped before being discarded
5. Reuse protective gloves should be thoroughly cleaned and air-dried after use
6. Choose gloves of the right size
Maintenance method
1. Put protective gloves in a dry, dark and constant temperature environment
2. When there are a large number of chemical substances remaining, use appropriate solvent to clean, but avoid using corrosive cleaning fluid
3. Dry the gloves thoroughly after washing. Do not use heat to dry the gloves unless instructed by the manufacturer, as it will age the gloves quickly
Proper use and maintenance can properly increase the service life of protective gloves.
safety gloves and goggles,safety gloves electrical work,safety gloves for woodworking,safety gloves rubber
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com