The customer, designer, project supervisor, and construction manager are involved. After the acceptance, the quality report is signed and confirmed. In recent years, due to the increasing number of disputes caused by home decoration, in order to satisfy both the decoration company and the consumer, consumers must understand how to accept. Consumers may check and accept their own home decoration according to the Beijing Municipal Home Decoration Engineering Quality Acceptance Regulations compiled by Beijing Building Decoration Industry Association. Acceptance In addition to identifying the overall effect of decoration, the main thing is to see if the quality of the hand is satisfactory. Acceptance can be identified from the following aspects (1) The lighting circuit shall be laid in accordance with the regulations. The socket, lighting switch, main gate, and leakage switch shall have a certain height, and the kitchen and air-conditioning shall be laid in dedicated lines. The television antenna and telephone line shall be installed in a position convenient for maintenance. (2) Drainage should be smooth, no leakage, backflow and water phenomenon, high-grade water parts without clamp marks and rubbing phenomenon. (3) It is a new masonry wall to be vertical, the bricks have the same level, the seams are even and tidy, the brick joints do not exceed 1 mm, and the overall tile error is not more than 0.8 cm. (4) It is the overall production error of the plane ceiling that does not exceed 0.5, the crack between the board and the board does not exceed 0.3mm, and the error of the plastic ceiling does not exceed 0.5mm. (5) It is not more than 0.2mm for the wood seal line, corner line, and waist line facing panel; the angle between the line and the line mouth is not more than 0.3mm; the interface between the veneer and the plate is not more than 0.2mm; the sliding surface of the sliding door is in error Not exceed 0.3mm. (6) The paint should be smooth, feel good, no traces of scratches, no color difference and nailing within one meter. (7) It is the straight line of the wall surface, and there is no obvious convexity and color difference within one meter. The construction quality is related to the quality of the construction team; it is also related to the unit price of the construction project. The best way is to sign a contract between the two parties before the start of construction to clarify the decoration requirements and acceptance criteria. Entrance decoration restaurant decoration decoration switch TV decoration family decoration socket kitchen sliding door A snap ring (a portmanteau of "circle" and "clip"), also known as a C-clip, Rotor Clip, circlip or Jesus clip, is a type of fastener or retaining ring consisting of a semi-flexible metal ring with open ends which can be snapped into place, into a machined groove on a dowel pin or other part to permit rotation but to prevent lateral movement. There are two basic types: internal and external, referring to whether they are fitted into a bore or over a Shaft. Circlips are often used to secure pinned connections. Snap Ring,C-Clip Circlip,Single Spring Mechanical Seal,Multi Spring Mechanical Seal Ningbo FLK Technology Co., Ltd. , https://www.flk-global.com