A large-scale industrial building used for the production of products. The general plant will have production facilities and a production line consisting of large machines or equipment. In the decoration of the factory building, the wall surface and the ground are very important. It is advisable to make a circular arc with a radius of 50 mm at the intersection of the two to help reduce dust, which is of great benefit to cleaning. Regarding the design and decoration of the plant, the contents of the design and decoration of the plant are briefly introduced for you. Plant design and decoration notes: 1. The first thing to consider when plant decoration is the ground part. The general plant decoration floor does not need to carry the load, then you can consider some inexpensive decorative materials, such as floor tiles or composite wood floors to make the factory floor decoration. Materials, some plants should be considered anti-static when decorating, then it is necessary to choose anti-static floor or anti-epoxy floor to be a good choice for the plant floor. 2. In addition, the top decoration should be paid attention to when the factory is renovated. The top of the factory building is usually high, and most of them are steel structure frames. When designing the top of the decoration, it is necessary to design reasonable arrangements for fire protection, ventilation, and air conditioning. They are all necessary hardware facilities for the renovation of the factory, especially fire protection. The next step is to determine whether the ceiling is a problem according to the requirements of the use. There are many materials for the ceiling of the plant. 3. The surface of the clean indoor walls and ceilings in the workshop shall conform to the requirements of smooth, smooth, non-ashing, glare-free, and easy to remove dust; the uneven surface shall be reduced, and the yin and yang angles shall be rounded. Interior decoration should be used for operation; if plastering, it should be plastered. Closed doors in clean rooms should be opened in rooms with high air cleanliness. An observation window should be provided on the closed door of the windowless clean room. Reliable sealing measures should be taken for the construction and construction gaps of clean room doors and windows, walls, ceilings, and floor (floor) surfaces. The color in the clean room should be light and soft. How to design the factory design and decoration ? 1. In order to prevent condensation between indoor and outdoor temperature, the gap between doors and windows between rooms with different cleanliness should be sealed. Door and window materials should have good weather resistance, small natural deformation, small manufacturing error, good air tightness, simple shape, not easy to accumulate dust, easy to clean, and no threshold for door frames. 2. The ceiling and the wall should be connected smoothly. The ceiling and the return air duct should be reliably closed. After the ceiling installation is completed, the lamp inspection is carried out to ensure no gaps. According to the process requirements, inspection walkways should be set up in the technical interlayer to facilitate the inspection and replacement of the pipeline. 3, industrial plant decoration design must implement the relevant national guidelines and policies, to achieve advanced technology, economic and reasonable, safe and applicable, to ensure quality, in line with energy conservation and environmental protection requirements. The above is Xiaobian's answer to the design and decoration of the factory building . I don't know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the exciting aspects of the factory design and decoration , please continue to pay attention to our decoration. Encyclopedia section! More related wonderful reading: Factory design and decoration method 25Mm Utility Knife,Mini Knife Cutter 25Mm,Utility Knife Retractable,Razor Blades Knifes Yucheng Weisite Measuring Tools Co., Ltd , https://www.wsttools.com
