How to quickly find the water ring vacuum pump wiring

When we first use the water ring vacuum pump, the first thing to do is to take another cable, when connecting the cable to pay attention to some of the correct wiring, otherwise it will affect the cable effect. Then when the cable, how do we quickly find the water ring vacuum pump wiring? How to quickly find the water ring vacuum pump connection 1, with polyester insulation tape bandage must be suppressed half of the first lap, band 8-12 Layer, water ring vacuum pump wrapped, then plastic tape wrapped two layers for strength. 2, the water ring on the vacuum pump copper core strip about 30-35mm long, clean the copper wire with emery cloth, shiny appropriate, the same external three-wire copper wire stripped 30-35mm, with a emery cloth clean. 3, the three-core cable and external cable stripped copper wire part of the plug up, and then use a thin copper wire tied tightly according to the sample, the remaining part of the cut, with scissors flat to prevent the tie. 4, the three wire solders were welded, requiring welding head surface smooth, burr-free and false welding phenomenon. If not welded or not smooth, water ring vacuum pump should be re-welded. Until you reach the request. 5, with plastic tape to three with the line package, dressing two layers, the first layer of more than 50mm per conductor insulation layer above the second layer over the first layer of the end 50mm. 6, after taking a pot of cold water will bandaging a good safety immersed in the thread, 12 hours later, with 500V megohmmeter insulation measurement can not be less than 50 megohms, or should be re-bandaged until it meets the requirements. 7, water ring vacuum pump grounding wire also need to be bandaged according to the diving cable connection process requirements. These are some quick ways to find the water ring vacuum pump, hope we can read after reading, can help. Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)

Led Strips

We supply various LED strips and Led Strips Driver, including 5730, 2835 and 5050 Outdoor LED strip lights.

The below information will help you to know more about LED strips..

Do LED light strips have to be plugged in?

The first thing we should note about these lights is that all electricity needs to have an outlet to work correctly. So yes, led strip lights do need to be plugged in. They also require some power source like batteries or solar panels, meaning there's no way around using electricity either way!

Can LED strips be cut?

LED light strips are favored for their versatility and flexibility - particularly since they can be cut to fit different areas of your home. Whether you want to add extra illumination to your kitchen counters or a backlight for your TV, LED strips can be trimmed to fit your needs and space.

Why do LED strips fail?

Bad Pin Connection – If your LED strip light fails to turn on at all, then check your pin connections. Most likely, the pin is not inserted correctly. In rare cases, the pin is faulty. These tiny connectors are rather delicate items so you have to be very careful when inserting them.

If you want to know more about the products in Led Strips, please click the product details to view parameters, models, pictures, prices and other information about Led Strips, Outdoor Led Strip Lights, Outdoor Strip Lighting, Exterior Led Strip Lighting.

Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Led Strips!

LED strips

LED strips attention

LED strips

Led Strips ,Outdoor Led Strip Lights,Outdoor Strip Lighting,Exterior Led Strip Lighting

NINGBO LONGFLIGHT INTELLIGENT TECHNOLOGY CO.,LTD , https://www.long-flight.com