N04400 Monel 400 Nickel Alloy Pipe&Bars

Model NO.: KM-170428
Standards: ASTM B165
Materials: Monel400, Monel K500, Ninckel200, Nickel201
Size: 1 - 600 mm
Delivery Time: 60 Days
MOQ: 100 Kgs
Package: in Bundle or Wooden Cases.
Trademark: KINGMETAL
Transport Package: Standard Seaworthy Package
Specification: 1 - 600 mm
Origin: China
HS Code: 75051200
N04400 Monel 400 Nickel Alloy Pipe&bars
 
Size Plate/Sheet:0.3-60mm(THK)*1220mm(WIDTH)*6000mm(LENGTH)
Bar:Round:Φ5.5-350mm
Wire:Φ0.1mm-18mm
Seamless Pipe:6mm-219mm(OD)*0.5mm-18mm(WT)
Flange:1/2"-56"
Fitting:According to the drawing.
Material Austenite Stainless Steel:Rs-2,317L,904L,253Ma(S30815),254SMo(F44/S31254)
Biphase stainless steel F51(S31803),F53(S32750),F55(S32760),329(S32900),A4
Hastelloy C276,Hastelloy C4, Hastelloy C22. Hastelloy B,Hastelloy B-2
Nitronic50(S20910/XM-19), Nitronic60(S21800/Alloy218), Alloy20Cb-3, Alloy31(N08031/1.4562)
Incoloy825, 309S, Inconel601,A286, Alloy59, 316Ti, SUS347, 17-4PH Nickle201... Ect.
Monel400, Monel k500, Ninckel200, Nickel201(N02201)
Inconel600(N06600),Inconel601(N06601),Inconel625(N06625/NS336),Inconel718(N07718/GH4169),Inconelx-750(N07750/GH4145)
Incoloy800H(NS112/N08810),Incoloy800HT(N08811),Incoloy800(NS111/N08800),Incoloy825(N08825/NS142), Incoloy901,Incoloy925(N09925),Incoloy926
1J50,1J79,3J53,4J29(F15),4J36(Invar36)
GH2132(incoloyA-286/S66286),GH3030,GH3128,BH4145(inconelx-750/N07750),GH4180(N07080/Nimonic80A)
Product range Bolt,nut,screw,washer, thread rod ,flange, fitting, seamless tubes, round bar, plate, wire


1. Product descroption
Introduction
N04400 Monel 400 Nickel Alloy Pipe is a Nickel-Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline Senvironments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity.
 
Chemical Composition of N04400 Monel 400 Nickel Alloy Pipe
The compositional range for N04400 Monel 400 Nickel Alloy Pipe is provided in the table below.
Element Content
Ni 63 % min
Cu 28 - 34 %
Fe 2.5 % max
Mn 2 % max
 
Typical Properties of N04400 Monel 400 Nickel Alloy Pipe
Typical properties of  N04400 Monel 400 Nickel Alloy Pipe are covered in the following table.
Property Metric Imperial
Density 8.8 g/cm3 0.318lb/in3
Melting point 1350°C 2460°F
Co-Efficient of Expansion 13.9µm/m.°C
(20-100°C)
7.7x10-6 in/in.°F
(70-212°F)
Modulus of rigidity 65.3 kN/mm2 9471 ksi
Modulus of elasticity 105-120 kN/mm2 15230-17405 ksi
 
Properties of Supplied Materials and Heat Treated Materials
Condition of Supply Heat Treatment (After Forming)
Annealed/Spring Temper Stress relieve at 300-320°C (570-610°F) for 1 hour and air cool.
Condition Approx Tensile Strength Approx Service Temp.
Annealed 400 - 600 N/mm2 58 - 87 ksi -200 to +230°C -330 to +445°F
Spring Temper 850 - 1050 N/mm2 123 - 152 ksi -200 to +230°C -330 to +445°F
 
Relevant Standards
N04400 Monel 400 Nickel Alloy Pipe is covered by the following standard:
BS 3075
3076 NA 13
DTD 204B
ASTM B164
 
Equivalent Materials
Equivalent materials to  N04400 Monel 400 Nickel Alloy Pipe are:
W.NR 2.4360
W.NR 2.4361
UNS N04400
AWS 040
 
Applications of  N04400 Monel 400 Nickel Alloy Pipe
N04400 Monel 400 Nickel Alloy Pipe typically finds application in:
Marine Engineering
Chemical Processing
Hydro-carbon Processing
Heat Exchangers
Valves
Pumps
 

IP65 LED SPOTLIGHT

HSONG LIGHTING CO,. LTD , http://www.lightingforproject.com