Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com
Pulp pump on the device requirements
If there is no handling of the pulp pump on the device, it may affect the quality of the pump work, then the pulp pump on the device What are the requirements? The requirements of the pulp pump device are described below: Pulp pump in the device Requirements 1. The Impeller will not block, generally made of open impeller, KCB gear pump cleaning is also easy, however, as long as the impeller flow channel wide enough spacious, then the closed impeller is also possible. 2. The back side of the impeller, equipped with back blades to prevent pulp from dipping into the stuffing box. In the same way, water is also injected into the seal. 3. The dimensions of the pump body are, of course, guaranteed not to be clogged with paper pulp. Larger holes are provided everywhere for cleaning, or structures that allow for easy removal of the end cap The structure in front of the pump suction port should allow the pulp to flow easily. To this high temperature residue pump, the suction pipe should be thick and short, and the suction side of the pool as high as possible. The main vanes are twisted at the entrance to a mixed flow pattern so that the flow of pulp can be easily absorbed. In the case of high concentrations, a pressure head of more than 2 m must be pressed in from the pump axis to the suction level, and a booster wheel mounted in front of the main impeller. 4 due to the high concentration of friction within the tube is very large, therefore, to try to make the extrusion tube is not insulated gear pump bending and manifold resistance. 5. Stir the paper slurry well and heat the gear pump so that it flows as evenly as possible into the suction port of the pump. 6. It is important that the air contained in the pulp be drained as far as possible before entering the impeller, as the centrifugal pump drastically reduces its performance when it contains air. In addition, the presence of air can destabilize the operation of the pump, so needless to say, a structure that does not retain air inside the pump body should be adopted. Extended reading: Top ten brands of motorcycles Canton Fair Central China Construction Water Exhibition Pump manufacturers ranked ptc exhibition industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: //beng.liuti. cn / (Service Hotline:)