Skoald launches innovative composite resin

The Scott Bader Research Center in the UK introduced the latest innovation, Crestapol 1234, a new ultra-high performance composite resin.

Their research chemists believe that they have now developed next-generation thermosetting resins that outperform thermoplastics and thermosets in the market today, such as specialty epoxy systems, Poyimides, polyetheretherketone, PEEK, PEI, PES. , PEK and cyanate esters. The performance of the Crestapol 1234 is very good. The real challenge that researchers at the Gothenburg Institute have always faced is accurately measuring the final performance level of fully cured test pieces.

Some stand-alone material test chambers initially contacted by Goldberg could not accurately measure the heat distortion temperature (HDT) and thermal decomposition temperature of Crestapol 1234; conventional composite resin test equipment cannot measure values ​​above 300 degrees Celsius, and the performance of Crestapol 1234 exceeds The largest measurement range.

The final test was conducted in two different certification testing organizations. The thermal deformation test was conducted at the Tianxiang Plastics Technology Laboratory in Massachusetts, USA. The heat distortion temperature of Crestapol 1234 exceeded 300 degrees Celsius, the thermal decomposition temperature was performed at Gear Scientific, Cambridge, UK, and Crestapol 1234 reached 330 degrees Celsius in air, reaching in an inert atmosphere. 340 degrees Celsius. Post curing temperature beyond 200 degrees Celsius of the standard resin does not affect its decomposition temperature.

The viscosity range of Crestapol 1234 resin is suitable for hand-filled or closed-mold processes for the production of filled and reinforced composite parts. The gel time (2G: 2LPT@25 degrees C) is 16-17 minutes. This new ultra-high temperature resin will be applied to aerospace, Automotive, electrical and electronics, oil and gas markets.

Glass Sliding Door

Products characters

1.All the products produced by good quality building material factory need get through three strict inspections before packing: Raw material cutting test, Production process inspection, The finished debugging.

2.Providing customized service to apply each customer requirements, we will try our best to achieve 100% customer satisfaction.


Profile

1.High quality aluminum alloy profiles, thickness 1.2-2.0mm

2.Excellent quality thermal break aluminum profiles, thickness 1.4-3.0mm

3.PVC/UPVC material (need to be ordered)



Color

White/ Sliver / Grey / Champagne / Black / Wood grain / special color can be ordered


Glass Type

1.Single toughened glazing:6mm/8mm/10mm/12mm...

2.Double toughened glazing:5+12A+5mm/6+12A+6mm...

3.Laminated glazing:5+0.38PVB+5mm/6+0.76PVB+6mm...

4.Low-E glazing:Green/Blue/Brown/Golden...

5.Other glazing:frosted glass/crystal glass/art glass...


Mesh

1.Aluminum security mesh

2.Stainless steel security mesh

3.Solid iron security mesh

4.Mosquito net(Nylon,Stainless steel,Diamond)


Hardware

1.Germany brand

2.Japanese brand

3.Chinese top brand


Surface treatment

1.Anodizing

2.Powder coating

3.Electrophoresis

4.Fluorocarbon paint

Glass Sliding Door,Tempered Glass Sliding Door,Double Glass Sliding Door,Automatic Glass Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffastdoor.com