The faucets on the market are all different, and the functions of the faucets are also increasing. The previous taps were only cold water or hot water. The basic hot and cold water taps in the current home are very convenient. So, today Xiaobian will teach you how to install the faucet ! Installation faucet Plano Concave Cylindrical Lens Plano Concave Cylindrical Lens,Biconcave Lenses,Optical Isolators,Dichroic Beam Splitter Lambda Research Optics ChangChun,LTD. , https://www.lambdachina.com
How to install the faucet
1, single hole basin faucet installation
When I am buying a single-handle washbasin, at the same time pay attention to the installation of the faucet, to go to the outlet diameter. Most of the faucet installations today are hard-tube water inlets. Before installing, pay attention to the height of the reserved water pipes. The best position is about 30 centimeters from the basin. When installing, be sure to choose a professional angle valve to install, and the angle valve must be fixed with the wall hot and cold water pipes. If there is a distance between the angle valve and the tap, you can use the tube to lengthen the connection. It is best not to use other pipes to connect, otherwise it is easy to leak and fall off due to high water pressure.
2, shower, bath mixer installation
If you have a bath, shower, wall-mounted faucet, etc. at home, you need to choose the right height when burying the water pipe. Hot and cold water pipes are more than 20 cm apart. When bathtubs and showers are concealed in faucets, it is best to embed the faucet's spool in the wall. Before considering the pre-buried, first consider whether the thickness of the bathroom wall can meet the requirements. If the wall is too thin, the valve plug cannot be embedded. When we pre-bury the valve plug, do not remove the plastic protective cover above, so as to avoid damaging the valve plug during cementing and other chores.
3, the installation of thermostatic faucet
Before we install the thermostatic faucet, we must first confirm which side of the water pipe is hot water and which side is cold water, especially when the hot and cold water pipes are taken over, do not take wrong so as not to affect the normal use of the faucet in the future. Gas and solar water heaters are not suitable for use with thermostats because the main reason is that the water pressure is too low. Remember to install hot and cold water filters when installing the thermostat.
4, single hole kitchen faucet installation
Due to the high frequency of use of kitchen mixers and the ease with which they can be moved around, it is only natural that all the requirements are stable. Therefore, the lock nut must be tightened. At present, there is a group of leaders in the building materials market to increase the number of nuts fixed in the nut, which has a very good solidification effect. Obvious effect will become a trend of the generation.
Xiao Bian concludes: The above is about the method of installing the faucet , Xiao Bian introduced it with this. I believe that after everyone has learned the above, you can install your own faucet. In the future, I would like to learn more about the related consultations. Please continue to pay attention to this site.