Whole kitchen cabinet installation and inspection method

The overall kitchen cabinet has triggered a new trend in kitchen and bathroom, and it has become a new hot spot in modern households. Consumer demand has been increasing. The overall kitchen cabinet is composed of four major parts, cabinet body panels, door panels, countertops, and hardware.


Italian quartz stone countertops     Vantage Kitchen Cabinets

The overall kitchen cabinet installation inspection method:

1. Quartz stone countertops: first look at the color is not the original selected color, the second with a hard weapon on the table to test the effect; another point is whether the table interface is fine, do not pick the middle of a line is very thick, the more Fine is better.

2. After the cabinets and hanging cabinets are installed, shake them vigorously to see if they are loose and if the installation is secure.

The cabinet must be shaken before installing the countertop. There is a level ruler on the construction installation site. After the cabinet is installed, you can use the level ruler to measure it. If a row of cabinets is horizontal, do not install the slope. Quartz stone countertops are 15mm thick. If the plates are free, it is best to place a full 16mm moisture-proof plate (or large core plate) below the mesa.

3. After the table is installed, the backwater will be marked with white glass glue. You have to look at whether the white (mildew proof) glass glue is of good quality. The poor glass glue does not look very slippery, and the good glass glue looks as smooth as (jelly), which is a metaphor.

4. The floor of the basin cabinet shall be waterproof and aluminum waterproof. After the basin cabinet is installed, transparent glass glue shall be used to reinforce the waterproof in the inner space of the basin cabinet. Remember to be transparent glass glue, white glass glue, see the water for a long time, then the poor hair will be hair enzymes. The same is true for the table top, so use good white glass glue.

5. The basin said last time that it should be filled with water to test for leaks. The main thing is to take over the underside of the basin. (When you use it later, you should also pay attention to the residue (particles) after washing or other things. The larger ones are washed away in the basin, and the long-term residual impurities will stay in the basin and the water will not drain. This is often a problem in use, because the sewage pipe is so big, leaving impurities for a long time. Hair enzyme, blocking the water.

6. Doors You have to take a closer look at the positive and negative sides of each door, whether there are scratches or inconsistent colors.

7. The door hinge should have the best of 6 screw holes. When you install it, you can look it. After it is installed, you can hold the door and shake it. If the screws are not tight, the door will loosen or the door will loose. Down, you learn how to adjust the door hinges on the spot with the masters. It will be useful to you. It will be normal for the doors to loosen after a few years. So you just have to learn how to install the door panel and adjust the door hinge. It's easy. It takes a few minutes to learn. Just a screwdriver can handle it.

8. After all the doors have been installed, you can see if all the doors are flush or not. Do not install the bumps. It is difficult to see. Handle installation is loose.

9. The top, bottom, front, left, and right sides of the door and the drawer must also be evenly spaced. The middle gap is about 3mm or so> 3mm too big to see.

10. To determine whether a set of cabinet installation is qualified mainly depends on two aspects, namely edge sealing and seams. Edges include: cabinet edge, door edge, and table edge;

Joints include: cabinet joints, door joints, countertops and cabinet joints, countertops and wall joints, and countertops and stoves, sinks and other joints.

11. Range hood installation should be kept level, firmly fixed on the wall or connecting plate, shall not loose or shake; the distance between the bottom of the hood and the table is 700mm, too high will affect the smoking effect.

12. Security is very important. Therefore, all drawers and baskets should be easy to pull, no block, and all exposed sharp corners of the cabinet must be blunt, metal parts in the touchable position to be sanded, does not allow burrs and sharp angles.

13. Cabinets, cabinets should be relatively horizontal, there is no edge of the plate, off the corner. Open the cabinet door and put your head in to smell it. Bad plates taste very heavy.

14. The formal installation site should pay attention to civilized construction. Before the construction, clean the site and remove the debris. During the construction, we must also pay attention to the protection of the product and the site. Clean up the garbage in time, and must not allow the sawdust and smoke to fly. We must not open the customer's range hood to extract the smoke. After the final installation, you must Clean up the sawdust and dust in the cabinet, then clean the cabinet body and table top, and finally clean the site, collect the packaging and the garbage left after the construction, and take it away.

15. The last thing is to plug in the power supply test to see if it is working properly. Look whether the surface is scratched. Is it a prototype? The model is not the style you choose. The others are not much problem. The most important thing is that all the electrical appliances cannot be installed properly. Loose (also installed horizontal), especially the hood, loose will fall down, serious consequences, disinfecting cabinet installation is also not loose, to see if the screws on both sides of the disinfection cabinet is locked, a total of 4 screws, 30-35mm long screws. Furnace installation can be loose, because it is necessary to put in and out, the furnace hole can not be opened too much (actual hole 655*355, can be plus or minus 10-15mm), too loose for future operations inconvenient.

16. Furnace cabinet doors must have vent holes, each crane is best to play 4 explosion screws better than 2 yards.

Cabinets Buying Building Materials Knowledge Plate Glass Range Hood Electric Household Vantage Cabinet Door Counter Cabinet Door Glass Counter Cabinets Glass Cabinets Door Cabinets Doors Cabinets Glass Cabinets Glass Doors Cabinets Chests of drawers

Self locking hydraulic jack

Self Locking Hydraulic Jack,Self Locking Bottle Jack,Self-Locking Type Hydraulic Jack,Self-Locking Hydraulic Jack

Taizhou Juhuan Lifting Protection Equipment Co., Ltd , https://www.jsjoba.com