6j12 Precision manganese copper wire

Model NO.: 6j12
Temperature coefficient of resistance: -3~+20
Trademark: TANKII
Transport Package: as Per Client′s Requirement
Specification: SGS
Origin: China
HS Code: 74082900
Model NO.: 6j12
Temperature coefficient of resistance: -3~+20
Trademark: TANKII
Transport Package: as Per Client′s Requirement
Specification: SGS
Origin: China
HS Code: 74082900
6j12 Precision manganese copper wire

Manganin wire 0.2mm
Product Description
Shunt Manganin widely used for Shunt resistor with the highest requirements, shunt manganin has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards.
Chemical Content, %
Ni Mn Fe Si Cu Other ROHS Directive
Cd Pb Hg Cr
2~5 11~13 <0.5 micro Bal - ND ND ND ND
 
Mechanical Properties
Max Continuous Service Temp 0-100ºC
Resisivity at 20ºC 0.44±0.04ohm mm2/m
Density 8.4 g/cm3
Thermal Conductivity 40 KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC 0~40α×10-6/ºC
Melting Point 1450ºC
Tensile Strength(Hard) 585 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft 390-535
Elongation 6~15%
EMF vs Cu, μV/ºC (0~100ºC) 2(max)
Micrographic Structure austenite
Magnetic Property non
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic
 
 

Resistance Alloy- Shunt Manganin Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft 
Wire &Ribbon diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm 
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm 
Also enameled condition is available
 6j12 Precision manganese copper wire
6j12 Precision manganese copper wire
6j12 Precision manganese copper wire
6j12 Precision manganese copper wire
6j12 Precision manganese copper wire

  6j12 Precision manganese copper wire

Manganin wire 0.2mm
Product Description
Shunt Manganin widely used for Shunt resistor with the highest requirements, shunt manganin has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards.
Chemical Content, %
Ni Mn Fe Si Cu Other ROHS Directive
Cd Pb Hg Cr
2~5 11~13 <0.5 micro Bal - ND ND ND ND
 
Mechanical Properties
Max Continuous Service Temp 0-100ºC
Resisivity at 20ºC 0.44±0.04ohm mm2/m
Density 8.4 g/cm3
Thermal Conductivity 40 KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC 0~40α×10-6/ºC
Melting Point 1450ºC
Tensile Strength(Hard) 585 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft 390-535
Elongation 6~15%
EMF vs Cu, μV/ºC (0~100ºC) 2(max)
Micrographic Structure austenite
Magnetic Property non
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic
 
 

Resistance Alloy- Shunt Manganin Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft 
Wire &Ribbon diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm 
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm 
Also enameled condition is available
 6j12 Precision manganese copper wire
6j12 Precision manganese copper wire
6j12 Precision manganese copper wire
6j12 Precision manganese copper wire
6j12 Precision manganese copper wire

 

Polyester Geogrid

The warp knitted polyester geogrid selects reinforced synthetic fiber as the material, using the warp knitted oriented structure, latitude and longitude of the roving in the fabric without curving condition to each other, the intersection unifies mutually with reinforced textile fiament bundle, which forms the reliable combining site,displays its mechanical fully.

11

Item TGSG15-15 TGSG20-20 TGSG25-25 TGSG30-30 TGSG35-35 TGSG40-40 TGSG45-45
Longgitudinal Tensile strength ≥ (KN/m) 15 20 25 30 35 40 45
Transverse Tensile strength ≥ (KN/m) 15 20 25 30 35 40 45
Longitudunal Elongation ≤ (%) 15
Transverse Elongation ≤ (%) 13
Longitudinal Tensile strength at 2% strain ≥ (KN/m) 5 7 9 10.5 30 30 30
Transverse Tensile strength at 2% strain ≥ (KN/m) 5 7 9 10.5 30 30 30
Longitudinal Tensile strength at 5% strain ≥ (KN/m) 7 14 17 21 24 28 32
Transverse Tensile strength at 5% strain ≥ (KN/m) 7 14 17 21 24 28 32
Width ≤ (m) 6


photobank (1)


Feature:

● Increase the bearing capacity of the roadbed and foundation and prolong their service life. Glassfiber Geogrid
● Prevent road surface and foundation from sinking or flawing, keep clean and beautiful ground surface. Plastic Geogrid
● Convenient construction saves time and labor, reduce mounting time and decrease maintenance expense. polyester geogrid
● Prevent culverts from flawing.

● Enhance earth slope and prevent water loss and soil erosion.

● Decrease underlayer thickness and save manufacturing cost.

● Enhance the stability of side slope turf net patch to improve greening.
● Replace wire netting used in mine as intermediate ceiling netting.


Product Application

121

Reinforced soil engineering

Reinforced soil retaining wall, steep slope and the reinforcement and consolidation of the soft ground.

Road construction

Ground treatment, reinforcement of the bridge abutment, reinforcement of the enbankment, reinforcement of the pile-net roadbed.

122

Irrigation projects
Protection of port, approach lane, seabeach, channel, river channel, dam and other irrigation projects.

Enviromental projects
Land reclamation, prevention and controlling of the desertification, and the composite protective structure in the landfill sites of urban garbage and waste.

123

Mine engineering
Coal mines, side slope protection of opencast mines, slope protection for the dumping site of the opencast mines,reinforcement to counter dam in the large tailing ponds of the metallurgical mines.

Soil engineering
Construction of stuffing and package system of heavy soil engineering.

124

Slope protection
Slope protection in the area affected by earthquake.


Dump leaching
Ground consolidation of large dump leaching and slag site.


Company Information

Customer Feedback

Packaging & Shipping

FAQ
Q : Are you a factory or trading company?
A : We are a professional manufacturer that specialized in geomembrane, geotextile, Composite Geomembrane etc with ISO9001.
certificate more than 15 years.
Q : Where is your factory located? How can I visit there?
A : Our facoty is located is No.10 Yuanshan Road High-tech Development Zone, Laiwu District, Jinan City China. You can take the
plan to Jinan Yaoqiang International Airport, then we can pick you up.
Q : Could you send the sample before order confirmation?
A : Yes, we'd love to send a free sample to you for an evaluation if you need.
Q : How about the delivery time?
A : General within 3-7 days after received the deposit.
Q : Can you produce the product according to customers' requirements?
A : Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q : Are you the Gold and Assessed supplier on alibaba?
A : Yes. We are the gold and assessed supplier on alibaba and has got the factory report by SGS.


Polyester Geogrid, Polyester Biaxial Geogrid, Geogrid Reinforcement Mesh

Shandong Jinruixiang Geotextile Material Co., Ltd , https://www.jrxgeosynthetics.com