Aluminum alloy door and window maintenance has a coup

Aluminum alloy door and window maintenance has a coup

In summer, many household items need to be carefully maintained, otherwise it is easy to produce bad changes in the wet summer and affect the service life. The same is true for aluminum doors and windows in homes, and it requires good maintenance. Jiuzheng Building Materials Co., Ltd. provides 7 coups to help you maintain aluminum doors and windows in summer.

Aluminum alloy door and window maintenance has a coup

1, aluminum alloy doors and windows in use, the action should be light, push and pull along the way; find it difficult to hard pull hard push, should be troubleshooting. Accumulation of dust, deformation is the main reason for the new aluminum doors and windows to pull out the difficulties, to keep the door frame clean, especially the push-pull tank clean. Vacuum cleaner can be used to suck the dust in the groove and door seal tops.

2, when cleaning aluminum alloy doors and windows, people do not step on the aluminum frame, do not pull the box for support.

3, aluminum alloy doors and windows can be used soft cloth dipped in water or neutral detergent, do not use ordinary soap and detergent, but can not use detergent, toilet detergent and other strong acid and alkali cleaners.

4. After the rainy weather, the wet glass and door frames should be wiped out in time, paying particular attention to draining the chute. If the chute is used for a long time, the friction force is increased. Add a little oil or a layer of wax oil.

5, should always check the aluminum alloy frame connection, tighten the bolts in time, replace the damaged parts. Positioning pins, wind braces, floor springs and other vulnerable parts of aluminum alloy doors and windows, should be checked from time to time, regularly add oil to keep clean and flexible.

6. Sealed tops and glass seals are the key structures that ensure the insulation of doors and windows. If any, they must be promptly repaired and replaced.

7, always check the aluminum frame wall joints, if ever loose, easy to make the frame as a whole deformation, so that doors and windows can not be closed, sealed. Therefore, loosening of the screws at the joints should be fastened immediately, such as loosening of screw footings, and application of epoxy glue to adjust a small amount of cement.

Single Ramming Pole Mounting System

Features:
1. It is very easy to install Ramming Pole Mounting System. You should insert vertical pillar into ground by Pile Driver. (The depth can reach 1500-2000mm).
2. High adaptability
The ramming pole mounting system can be widely used different geological conditions. Besides, the installation is free from seasonal change.
3. Environmental-friendliness
There is no much preparation for installation and piles can be recycled. It had no damage and no corrosion to environment.
4. Ramming pole can be easily installed and removed.
5. The ramming pole mounting system areas with low rock content to reduce cost on base construction and to shorten installation time.

Solar Panel Pole Mount,Solar Panel Mounting Brackets,Ground Mounting System,Solar Panel Stand,Single Ramming Pole Mounting System

Hebei Honde Plastic & Metal Co., Ltd. , https://www.foundation-system.com