Bathroom tile paving problem teach you tile with collocation design

Bathroom decoration is one of the focus of home improvement, a good bathroom can bring us a warm and comfortable feeling, but we inadvertently ignore some of the small details, it is these small details, to become a bathroom decoration Big pen. The following small series for everyone to introduce the bathroom tile tile related knowledge.

Teach you to tile layout design

1, tile laying with a program of stress

Some ceramics brands that are more professional in designing products have already considered the plan of laying ceramic tiles in space and will use appropriate tile and waistline according to the tiles. However, if the industry recombines when it comes to buying tiles, it is necessary to carefully study the colors and textures so as to match the design styles. The size and width are all harmonious and perfect.

In color matching, there are also some rules to follow, such as dark and light colors, similar colors, with the same color, cold and warm colors, Wuji and other colors wild, contrast color production. In the style, there are also large and small, square and round, point and surface, long and short with the stress.

Finally, after the floor tiles are finished, the surface should be clean, the pattern is clear, the color is the same, the joints are even, the perimeter is straight, the joints are smooth and smooth, and the plates are free of cracks, falling angles, and missing defects, so as to ensure a beautiful decoration effect. It is a picture of the effect of the superfine crystals of the "I crystal control crystal diamonds" ultrafine crystals of the gold rudder ceramics, and the importance of matching can be seen.

2, different design styles and different sizes of space on the requirements of tile paving

For different design styles, or different sizes of space, there are exquisite attention to tile paving, such as the atmosphere or simple space, the way the tiles are laid out also pays attention to simplicity, emphasis on horizontal and vertical; and rural rustic style stresses paving as far as possible Rough and original; European antiques emphasizes the fancy and complicated style of tile paving, and it uses wave lines and flowers.

As far as the general situation is concerned, toilets, kitchens and balconies less than 10 square meters are usually 300*300mm. About 20 square meters living room bedroom, choose 600*600mm.

More than 30 square meters of large living room, 600 * 600 or 800 * 800mm are available; if more than 40 level, consider using 800 × 800mm or 1000 × 1000mm tiles, such as gold rudder ceramic coast stars, gold coast and other polished tiles , I crystal-controlled microcrystalline stone and so on.

For small bathroom, light-colored tiles are beneficial to expand the visual field space, and reflective light can also improve the brightness of small spaces. In addition, tile specifications are mostly used for 300x300mm, such as gold rudder ceramic wall tile tiger series tiles.

In addition, such a space can be selected for the ever popular white line, and you can also choose red, orange, blue and other warm and cold colors with matching tiles. If the bathroom is large, you can use dark-colored tiles and light-colored tiles, which are both stable and lively atmosphere.

3, the beauty of details

The details of the tile paving are perfect, and to a large extent will affect the aesthetics of the decoration space, such as the waist line, has always been horizontal, now popular vertical waist line, more smooth on the line, and elegant and durable, It is also culturally or modern.

There is also such as staggering, that is, with a seaming agent to deal with crevices, cracks in the gap before the tiles should be cleaned before the impurities, with a special sealant joints, if the work is not done well, will also affect the decorative effect Especially the living room is very important.

In addition, tile tiles have a higher degree of freedom in the collage, but a wall may be rather messy. In this case, it is recommended to use white as the bottom, and decorate the tiles to make a variety of shapes. There is also a room with a relatively simple spatial structure that can be decorated with special pattern-like tiles.

In addition to the above, there is a kind of hand-painted tiles, not based on the fixed pattern styles provided by the brand, but the portraits of their favorite characters, landscape photos, world famous paintings, or their own hand-painted drawings, customized by the manufacturers, but the price is relatively high It is also beautifully matched.

Bathroom tile problem

1, leaving the problem

The joints of the bathroom tiles can not be too small, the tiles remain too small to reduce the service life of the tiles, and the tiles are cracked and glazed when undergoing thermal expansion and contraction.

Xiao Bian suggestions: Whether it is a seamed tile or a seamless tile, it must pay attention to leave the seam. Polished tiles are generally 1mm, tiles 2-5mm, antique tiles 5-8mm.

2, the problem of caulking

Nowadays, many workers start to make joints immediately after the bathroom tiles are laid, which is very inappropriate. Because the tiles are not completely dried, the tiles are likely to be loose during the jointing process and the tiles will fall off later. , leaving security risks.

Xiao Bian suggested that: Tiles should be fixed before the tiles are dried. Normally any time after 24 hours.

3, to clean up before laying tiles

Some irresponsible construction teams put plaster on the wall when putting on the wall tiles, and put the bricks on the wall without scraping the putty. The safety hazards of this approach are very large. Due to the large cement, putty Can not hang on the cement, easily lead to the loss of tiles. This is also very insecure!

Xiao Bian recommends: Before the tiling, the wall must be inspected. If there is a crack in the wall, it must be first processed and the wall surface cleaned.

4, after the tile laying good protection issues

The tiles are well protected when paving, do not scratch the brick surface and contaminate the brick surface. Moving around without a dry brick surface, painting a wall surface, using a protective film on the floor of the paint, etc., often occur during the construction process, and these will cause damage to the tiles.

5, tile laying problem

In particular, when the wall tiles are in contact with the sun's corners, be careful not to damage the glaze of the tile. Be careful of the gap when linking. Do not make it too small.

6, tile off the problem

When plastering a wall tile, cement mortar is used as an adhesive. The water absorption rate of the wall tile is large. If the water is not immersed in advance, the porous ceramic tile will absorb the moisture in the cement mortar. The cement needs a lot of moisture during the curing process, because the water loss becomes no adhesive force and there is no strength, and the bricks and mortar with cement mortar come off together from the wall.

7, the quality of ceramic tiles in construction

When the decoration company has problems with the quality of the tiles during construction, it must communicate in a timely manner.

8, make a good brick plan before paving

Many of the construction workers started to shop when they got the bricks. When the paving went to a certain extent, it was found that the tile bricks were ineffective and the proportions were inconsistent, so they were removed and re-paved, causing unnecessary wear and tear.

Xiaobian suggestions: Make a paved brick plan before paving.

9, tile coating mortar proportion

In order to prevent the cement from shrinking and causing a large tensile stress and cracking the tiles, it is advisable to use low-grade cement 325 or less, and 1:3 cement mortar to tile the tiles.

10, tiles on demand water

Now often see some customers to retreat tiles that have not been used, and found that some can not be returned, because the tiles bubbled over. Manufacturers or businesses nowadays can not be returned in general, if there is no use of tiles that will cause unnecessary waste.

Xiao Bian summary: Through the introduction of the above content, I believe that my friends have already had a comprehensive understanding of the problem of toilet tiles. Want to know more relevant knowledge, please continue to pay attention to Qi family information.


 

Bathroom Design Loft Bathroom Decoration Design Family Bathroom Decoration Design Simple Glass Bathroom Decoration Design Classical European Style Bathroom Decoration Design

Material :Natural slate , quartz,sandstone ,marble etc . 

Size       :12''*12''
Shape   :Square shape 

Packing :Hard carton then fumigated strong wooden crate.

 The wooden crate size is made as the container size . After loading the wooden crate in the container ,the wooden crates will nearly same size with the width of the container .It can make the wooden crate not have space to move during transport . In this case ,it can keep the stone safety mostly

Application : Can be used to decorate the outside wall or inside wall .Decorate your house ,decorate your life .


Marble Mosaic

Marble Mosaic,Marble Mosaic Tile,Marble Mosaic Floor Tile,Stone Mosaic Tile

HEBEI DFL STONE , https://www.dflstone.com