The installation procedure and technical requirements of the air sterilizer, many users will consider its installation steps and inspection requirements when purchasing the air sterilizer. Xiaobian has compiled some air sterilizer installation, debugging and testing methods according to this problem. I hope that Help users who need it. 1. It can be cut and processed, with high production efficiency, high speed, no deformation of the machined surface, no burr, especially suitable for occasions with high welding quality and efficiency requirements.
10. Lightweight design, light and easy to carry, on-site cutting has a unique advantage
The Desktop Cnc Cutting Machine is a CNC bench-top Cutting Machine structure. The whole machine work surface adopts the integral rim structure, which has the characteristics of stable and reliable operation and long service life. The model adopts optical axis linear guide and bilateral drive. It can realize the cutting of any metal materials according to any pattern, with good effect, no dross and burr, widely used for cutting carbon steel, low alloy steel, stainless steel, copper and copper all kinds of metal plate materials.
The installation procedure and technical requirements of the air sterilizer, many users will consider its installation steps and inspection requirements when purchasing the air sterilizer. Xiaobian has compiled some air sterilizer installation, debugging and testing methods according to this problem. I hope that Help users who need it.
First, the product unpacking and inspection
1, unpacking and precautions
1) Take out the two plastic bags in the box, which are equipped with the product manual, packing list, warranty and installation and fixing accessories;
2) Remove the foam around the equipment;
3) Take out the device and prepare to install it.
2, check the content:
1) There are no remnants in the box;
2) Whether the appearance of the equipment is damaged or scratched;
3) Whether there is abnormal noise in the equipment, such as taxation of small metal parts;
4) Check if the device matches the packing list.
Second, the installation technical requirements of the equipment
1. Installation method of mobile air sterilizer:
Open the box, take out 4 wheels, and install it in the four round holes on the bottom of the product with the installation tool. It can be easily moved at will.
2. Installation method of wall-mounted air disinfection machine:
A installation requirements:
1) The height of the mounting plate is 2m from the ground, and the hanging plate is fixed with 4 metal expansion screws;
2) The metal expansion nail is M8x75mm;
3) the metal expansion dowel is inserted into the mounting hole of the hanging plate;
4) The hanging plate should be fixedly mounted on the metal expansion rivet and must not be loose;
5) Determine that the equipment hanging plate is parallel to the wall surface;
6) Hang the device on the hanging board.
B installation steps:
1) Drill two other 10mm mounting holes perpendicular to the wall with an impact drill;
2) Insert the M8x75mm metal expansion rivet and use a tool to tighten a snail field;
3) After the metal hanging plate is parallel to the ground, the second screw field is now fastened;
4) Then drill two 10mm mounting holes to tighten the hanging plate;
5) hang up the device;
6) Insert the power plug into the power socket that meets the power requirements; manually select each function to confirm that the machine is working properly.
3. Installation method of ceiling air disinfection machine:
Concealed installation on the ceiling, the height from the ceiling slab should not be less than 500mm, if the overall ceiling needs to be opened and equipped with maintenance access.
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
2. Wide range of applications.
3. Applicable materials: cast iron, cast steel, structural steel, tool steel, bearing steel, stainless steel, copper and copper alloy, aluminum and aluminum alloy, plastic and so on.
4. Wide range of applicable sizes
5. Multi-cut technology, the pipe is stationary, the tool rotates, and the safety performance is high.
6. With temperature rise protection, long motor life
7. The pipe is automatically centered during clamping and can be automatically fed. It is easy to operate.
8. The main motor adopts constant speed feedback regulation, and the process of cutting the groove is stable.
9. All specifications can realize automatic feeding function, easy to use
Stainless Steel Plate Cutting Mchine
Stainless Steel Cutting Machine,Stainless Steel Plasma Cutting Mchine,Stainless Steel Laser Cutting Machine,Stainless Steel Plate Cutting Mchine
Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com