Brief description of specific installation instructions for food grade PE storage tanks

The PE storage tank can be put into use after it is manufactured, and there is a step to the middle, that is, the installation is in place. If the installation is not in place, it will directly affect the use of the product, so let Xiaobian give you a brief explanation of the specific contents of the PE storage tank during installation!
The PE storage tank can be put into use after it is manufactured, and there is a step to the middle, that is, the installation is in place. If the installation is not in place, it will directly affect the use of the product, so let Xiaobian give you a brief explanation of the specific contents of the PE storage tank during installation!

1. The cement floor foundation for installing PE storage tanks must be horizontal and can withstand the corresponding bearing capacity. If the steel structure is in the air, the gap should not be too large, and the iron plate can be laid on top to keep the level and ensure the level of the tank surface. To increase the life of the tank.

2. PE storage tanks should be leak tested with water before storing chemicals to prevent unnecessary losses. There should be a good drainage ditch and dilution device around the site. Please call us when changing the liquid.

3. Since the PE storage tank is inevitably formed at the bottom to form a spherical crown in the tank, the foundation must be flat. It is recommended to use the yellow ball and the corresponding spherical crown on the bottom of the tank on a horizontal basis.

4, opening and accessories according to the customer's use of configuration, there are PE flange, PE interface; PVC, ABS, stainless steel "target=_blank> stainless steel, iron interface, etc.. Strong acid, strong alkali, organic solvent feed The mouth and discharge port are connected by PE material flange. For example, 98% concentrated sulfuric acid, 65% concentrated nitric acid, organic solvent (formaldehyde, toluene, etc.) are directly contacted with our company. Our company provides special accessories.

5. The pipe connected to the lower joint of PE storage tank or flange should be perpendicular to the wall of the barrel. It is best to use soft connection or shock absorber. Please arrange the reinforcement sleeve for more than 10 cubic meters of storage tank to avoid the surface of the barrel. Uneven expansion causes the connection of the discharge port to be damaged, resulting in leakage. In severe cases, the joint box barrel is damaged. When unloading and installing, please use the crane or call us.

6. When installing a heavier auxiliary equipment such as a mixer on a PE storage tank, or if the person has to work on the top of the tank and the top of the tank cannot bear the weight of the person, please make another shelf or ladder and pay attention to the safety of the work. In the case where the liquid level cannot be controlled, an overflow port should be installed to prevent the liquid from overflowing from the manhole and cause unnecessary damage.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Check Valve depends on the medium flow to open and close automatically, prevent the liquid backflow, it also named non return valve, one way valve, back pressure valve. Ningbo RMI Plastic Co.,Ltd offer different models of plastic check valves include Swing Check Valve, Ball Check Valve, Wafer Check Valve. end connection by flange, socket welding and wafer.

Plastic Check Valve is usually made by material of PVC,CPVC,PVDF,PP,PPH, PTFE lined and rubber lined. RMI PLAST brand plastic check valves are designed and produced according to international standards as DIN, ANSI, JIS, CNS, BS, etc.

Plastic check valves have the advantages as follows: 1, good corrosion resistance. 2, light weight, easy to install and maintaince. 3, cheap price. plastic check valve is mainly used in water treatment, agriculture irrigation, swiming pool water supply, fish farm, mining plant, steel facory, chemical industries.

Check Valve

Swing Check Valve,Wafer Check Valve,Ball Check Valve,Plastic Check Valve

Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com