Constantan Wire/Strip/Bar/Foil/Ribbon Cu56ni44 220V Electric Resistance Wire for Oven Design

Model NO.: SP-OhmAlloy049
Sheath Material: None
Insulation Material: None
OEM: Available
Trademark: Ohmalloy
Transport Package: Wooden Case
Specification: 0.06mm~8mm
Origin: China
Model NO.: SP-OhmAlloy049
Sheath Material: None
Insulation Material: None
OEM: Available
Trademark: Ohmalloy
Transport Package: Wooden Case
Specification: 0.06mm~8mm
Origin: China
Constantan Wire/Strip/Bar/Foil/Ribbon Cu56Ni44 220v Electric Resistance Wire for Oven Design
 

(Common Name: CuNi45, NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,constantan.)

OhmAlloy049 is a copper-nickel alloy (Cu56Ni44 alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures up to 400°C

Typical applications for OhmAlloy49 are temperature-stable potentiometers, industrial rheostats and electric motor starter resistances.

The combination of negligible temperature coefficient and high resistivity makes the alloy particulary suitable for the winding of precision resistors.

OhmAlloy049 is manufactured from electrolytic copper and pure nickel. In finer wire sizes the alloy is designated as OhmAlloy49TC(Thermocouple).


Copper Nickel Alloy Heating Resistance Wire and Strip Technique Data
 

Name

 Our Code

Resistance Ω at 20 °C

the maximum temperature°C

Copper-nickel--1

OhmAlloy3

0.03

200

Copper-nickel--2

OhmAlloy5

0.05

200

Copper-nickel--8

OhmAlloy12 

0.12

250

Copper-nickel--10

OhmAlloy15

0.15

200

Copper-nickel--14

OhmAlloy20

0.2

300

Copper-nickel--19

OhmAlloy25

0.25

300

Copper-nickel--23

OhmAlloy30

0.35

350

Copper-nickel--30

OhmAlloy35

0.35

350

Copper-nickel--34

OhmAlloy40

0.4

350

Copper-nickel--44

OhmAlloy49

0.5

400


Copper Nickel Alloy Heating Resistance Wire Cuni8 Technique Data

Normal composition%
Nickel 45 Manganese 1
Copper Bal.    

Typical Mechanical properties(1.0mm)
Yield strength Tensile Strength Elongation
Mpa Mpa %
250 420 25

Typical Physical properties
Density (g/cm3) 8.9
Electrical resistivity at 20ºC (Ωmm2/m) 0.49
Temperature factor of resistivity(20ºC~600ºC)X10-5/ºC -6
Conductivity coefficient at 20ºC (WmK)                  23
EMF vs Cu(μV/ºC )(0~100ºC ) -43

Coefficient of thermal expansion
Temperature Thermal Expansion x10-6/K
20 ºC- 400ºC 16

Specific heat capacity
Temperature 20ºC
J/gK 0.41
Melting point (ºC) 1280
Max continuous operating temperature in air (ºC) 400
Magnetic properties non-magnetic

Corrosion resistance performance
Alloys Working In atmosphere at 20ºC            Working at max temperature 200ºC
Air and oxygen contain
gases
gases with Nitrogen gases with sulfur
oxidability
gases with sulfur
reductibility
carburization
OhmAlloy049 good bad bad bad bad good

Style of supply
Alloys Name Type Dimension
OhmAlloy049W Wire D=0.03mm~8mm
OhmAlloy049R Ribbon W=0.4~40 T=0.05~2.9mm
OhmAlloy049S Strip W=8~200mm T=0.1~3.0
OhmAlloy049F Foil W=6~120mm T=0.005~0.1
OhmAlloy049B Bar Dia=8~100mm L=50~1000

Our Packing
Constantan Wire/Strip/Bar/Foil/Ribbon Cu56ni44 220V Electric Resistance Wire for Oven Design





  Constantan Wire/Strip/Bar/Foil/Ribbon Cu56Ni44 220v Electric Resistance Wire for Oven Design
 

(Common Name: CuNi45, NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,constantan.)

OhmAlloy049 is a copper-nickel alloy (Cu56Ni44 alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures up to 400°C

Typical applications for OhmAlloy49 are temperature-stable potentiometers, industrial rheostats and electric motor starter resistances.

The combination of negligible temperature coefficient and high resistivity makes the alloy particulary suitable for the winding of precision resistors.

OhmAlloy049 is manufactured from electrolytic copper and pure nickel. In finer wire sizes the alloy is designated as OhmAlloy49TC(Thermocouple).


Copper Nickel Alloy Heating Resistance Wire and Strip Technique Data
 

Name

 Our Code

Resistance Ω at 20 °C

the maximum temperature°C

Copper-nickel--1

OhmAlloy3

0.03

200

Copper-nickel--2

OhmAlloy5

0.05

200

Copper-nickel--8

OhmAlloy12 

0.12

250

Copper-nickel--10

OhmAlloy15

0.15

200

Copper-nickel--14

OhmAlloy20

0.2

300

Copper-nickel--19

OhmAlloy25

0.25

300

Copper-nickel--23

OhmAlloy30

0.35

350

Copper-nickel--30

OhmAlloy35

0.35

350

Copper-nickel--34

OhmAlloy40

0.4

350

Copper-nickel--44

OhmAlloy49

0.5

400


Copper Nickel Alloy Heating Resistance Wire Cuni8 Technique Data

Normal composition%
Nickel 45 Manganese 1
Copper Bal.    

Typical Mechanical properties(1.0mm)
Yield strength Tensile Strength Elongation
Mpa Mpa %
250 420 25

Typical Physical properties
Density (g/cm3) 8.9
Electrical resistivity at 20ºC (Ωmm2/m) 0.49
Temperature factor of resistivity(20ºC~600ºC)X10-5/ºC -6
Conductivity coefficient at 20ºC (WmK)                  23
EMF vs Cu(μV/ºC )(0~100ºC ) -43

Coefficient of thermal expansion
Temperature Thermal Expansion x10-6/K
20 ºC- 400ºC 16

Specific heat capacity
Temperature 20ºC
J/gK 0.41
Melting point (ºC) 1280
Max continuous operating temperature in air (ºC) 400
Magnetic properties non-magnetic

Corrosion resistance performance
Alloys Working In atmosphere at 20ºC            Working at max temperature 200ºC
Air and oxygen contain
gases
gases with Nitrogen gases with sulfur
oxidability
gases with sulfur
reductibility
carburization
OhmAlloy049 good bad bad bad bad good

Style of supply
Alloys Name Type Dimension
OhmAlloy049W Wire D=0.03mm~8mm
OhmAlloy049R Ribbon W=0.4~40 T=0.05~2.9mm
OhmAlloy049S Strip W=8~200mm T=0.1~3.0
OhmAlloy049F Foil W=6~120mm T=0.005~0.1
OhmAlloy049B Bar Dia=8~100mm L=50~1000

Our Packing
Constantan Wire/Strip/Bar/Foil/Ribbon Cu56ni44 220V Electric Resistance Wire for Oven Design





 

Diamond Wire Saw For Marble

The basic structure of the Diamond Wire saw: its components are 1 .wire rope, 2.diamond beads 3.springs with different lengths of two specifications 4.washers 5.fixed ring. Generally, each diamond bead is a combination of cutting units. There are usually 20, 30, 40, 5 diamond beads per meter wire saw, and the most commonly used number is 30 per meters . Also We can accept the customization.



Diamond Wire Saw For Marble,Marble Wire Saw,Marble Cutting Wire Saw,Marble Diamond Cutting Wire Saw

Jiangyin Baoneng Precision New Material Co.,LTD , http://www.baonengwire.com