The corrosion-resistant and wear-resistant mortar pump is specially designed for conveying corrosive media containing fine particles. The pump is made of steel-lined ultra-high molecular weight polyethylene (UHMW-PE). The corrosion-resistant and wear-resistant mortar pump is specially designed for conveying. Designed and developed with fine-grained corrosive media, the pump is made of steel-lined ultra-high molecular weight polyethylene (UHMW-PE), which is the latest generation of corrosion-resistant and wear-resistant engineering plastics for pumps. It has the best wear resistance, impact resistance (especially low temperature impact resistance), creep resistance (enhanced environmental stress cracking) and excellent corrosion resistance in all plastics. Ultraviolet Lamp,Pll Uvc Tube,Pll Uvc Light,Pll Uvc Bulb Changxing leboom lighting product CO.Ltd. , https://www.leboomuvd.com
Corrosion-resistant and wear-resistant mortar pump is a pump that can adapt to various working conditions, such as conveying acid, alkaline liquid or slurry; pulp in metallurgical industry; dilute acid in sulfuric acid industry; various sewage in environmental protection industry, etc. . The pump is both corrosion and wear resistant and has a wide range of applications. The corrosion-resistant and wear-resistant mortar pump has the following characteristics:
1. Abrasion resistance: The overcurrent components are all made of steel-lined ultra-high molecular weight polyethylene. The wear resistance is the first in plastics, four times higher than nylon 66 and PTFE. It is carbon steel and stainless steel "target=_blank> Stainless steel wear resistance 7-10 times.
2, impact resistance: ultra high molecular weight ethylene impact strength ranks first in general engineering plastics, is 5 times the copolymer (ABS), and can be stable at minus 196 ° C, which is not available in any other plastic characteristic.
Analysis of product advantages of corrosion-resistant and wear-resistant mortar pumps:
1. Strong wear resistance: The corrosion-resistant wear-resistant mortar pump over-flow parts are all made of steel-lined ultra-high molecular weight polyethylene (UHMW-PE), and the wear resistance of ultra-high molecular weight polyethylene (UHMW-PE) is plastic. First, it is 4 times higher than nylon 66 (PA66) and polytetrafluoroethylene (PTFE), which is 7-10 times of the wear resistance of carbon steel and stainless steel "target=_blank> stainless steel.
2, strong impact resistance: ultra high molecular weight polyethylene impact strength ranks first in general engineering plastics, is 5 times (acrylonitrile / butadiene / styrene) copolymer (ABS), and can be under 196 Stable at °C, which is a feature not found in any other plastic.
3. Excellent corrosion resistance: Corrosion-resistant and wear-resistant mortar pump can resist various corrosive media (acid, alkali, salt) and organic solvent in a range of temperature and concentration, in 80 kinds of organic solvents at 20 ° C and 90 ° C. Dipped for 30d. There is no abnormality in appearance, and other physical properties are almost unchanged.
4. No noise: The impact energy absorption of ultra-high molecular weight polyethylene is the highest value in plastics, and the sound-absorbing property is good, so that the noise generated by liquid flow is minimized during the transportation process.
5, safe and reliable, no toxin decomposition: The ultra-high molecular weight polyethylene (UHMW-PE) used in this pump is extremely stable and therefore suitable for use in the food industry.
6. Low friction coefficient: The internal friction of the corrosion-resistant and wear-resistant mortar pump is only 0.07-0.11, so it has self-lubricating property. Under water lubrication conditions, the dynamic friction coefficient is lower than that of PA66 and polyoxymethylene (POM). When working in sliding or rotating form, it is more lubricious than steel and brass after lubricating oil.
7. Good anti-adhesion: Ultra-high molecular weight polyethylene (UHMW-PE) has excellent anti-adhesiveness and anti-adhesive ability comparable to that of PTFE, so it is also outstanding when transporting some medium with high viscosity.
Zibo Luming is at your service
phone
Website: http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn