Do you believe it? Hood machine purchase errors using a large inventory

Hoods have become an essential kitchen equipment for modern families. Many people will buy online shopping hoods, they will go to the Internet to buy some of the buying skills, but in the actual purchase and use still can not step on some of the purchase errors. The following Xiaobian arranges some common mistakes for daily shopping and use.

Misunderstanding 1: Panel material does not matter

With regard to the panel material, the promoters may “forget to forget” and not mention it, or simply say the name of a certain alloy to bluff the consumer. In fact, to inspect the material is also very simple, the best domestic material is generally imported M-Cr stainless steel material, looks fine texture. This material is resistant to oxidation, corrosion and will be brighter and brighter. To distinguish the difference between this material and the general alloy material, it is only necessary to directly use the magnet to test it. If it can be sucked on, it must be a general inferior alloy or iron type. The steel material cannot be sucked on.

Misunderstanding 2: The greater the power, the greater the suction

Although the increase in power can increase air flow and wind pressure, the exhaust air volume and the smoke absorption rate are not equated. And the higher the power, the more noise it generates, and the more power it takes.

In general, there are two factors that determine the suction efficiency of the hood: First, the amount of exhaust, and second, the distance from the inlet of the hood to the pan surface. The latter is the most important for the pumping effect. The closer the distance, the cleaner the pumping. On the contrary, if the installation distance of the hood is too high from the pan surface, most of the smoke is sucked into the hood by the surrounding air. The actual amount of exhaust air that is applied to the fumes is less and less, and the large amount of power does nothing. Only. Therefore, the power is not as great as possible. Also depends on the internal cavity structure, turbine and motor quality and other factors, if only a large power and other non-compliance, it will only consume more power.

Misunderstanding 3: Round inlet 360° inlet

Many side suction machines on the market have a round mouth in the middle and claim 360° air inlet. However, in fact, the cooking fumes produced by the two burners are distributed on both sides, and the central position of the fume only guarantees that the smoke closest to the central area enters in all directions, and smoke far away is easy to escape, so this 360° The air intake is only a 360° open design and does not allow full access to the smoke. In order to inhale smoke from both stoves at the same time, it is necessary to ensure a generous air intake.

Hood side suction range hood

Automatic Sliding Door

Automatic Sliding Doors can either be a single door sliding in one direction or bi-parting doors where each door leaf slides in the opposite direction. They are often used in grocery stores, entrances to shopping malls, hospitals and other applications where you want to provide your customers a hands free, safe and easy access to your building.

Hospitals

Airports

Retail centers

Pharmacies

Hotels

Grocery stores

Hardware stores

Sporting goods stores

And more

In addition, one of the biggest benefits of automatic doors is energy savings. Since these doors only open when someone comes in or out of your building, it prevents the loss of energy when a door may otherwise be left open for a long time.

Hongfa will only dispatch highly trained CE Certified inspector/technicians to inspect, repair, service or replace automatic doors. This ensures we provide the most efficient and safest door repair for your business.

Automatic Sliding Door,Automatic Sliding Glass Door,Sliding Door With Automatic System,Automatic Stacking Sliding Glass Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com