Epoxy mortar instructions and precautions call manager Inline Water Circulation Pump,Centrifugal Water Circulation Pump,Vertical Pipe Pump,Circualtion Pump Shanghai NuoSai Pump Manufacturing Co., Ltd. , https://www.nuosai.net
Message mailbox:
Official website:
Epoxy resin features
1. It has the properties of impermeability, antifreeze, salt, alkali and weak acid corrosion, and has strong adhesion to various materials.
2, can be applied on the surface of the wet substrate, without drying, can be hardened in a humid environment or underwater.
3, easy to operate and construction, similar to ordinary cement mortar construction, easy to clean, water can be cleaned.
Epoxy resin clay use
1. It is used for the anti-shock wear, anti-cavitation and anti-freeze-thaw protection of the overflow surface of hydraulic structures, and the repair after damage.
2. Used for defect repair and reinforcement and reinforcement treatment of concrete buildings.
3. It is used for the protection and repair of acid and alkali corrosion of concrete or metal components such as chemical, petroleum, factory and dock.
4. It is used for anti-wear protection and repair of engineering parts such as highways, bridges, airport runways and workshops.
5, used for acid-resistant brick paste.
Execute standard GB50212-2002 epoxy resin mortar (epoxy repair mortar)
Epoxy resin technical parameters
Epoxy resin clay acid and alkali resistance
Epoxy resin mortar construction process
First, the base surface treatment:
The surface of the concrete foundation is treated to remove the surface of the surface of the cement, the surface of the cement paste or the loose particles to expose the solid base layer, and to remove surface sand, dust, grease and the like.
Second, material preparation:
1. Check the product packaging, specifications, model, and production date to ensure that the product is within the warranty period specified by the manufacturer.
2. Open the package lid and check that the A material, B material and C material are not damaged, leaked or damp and agglomerated. The assembly ratio in each barrel is A material: B material: C material=1:3:16 .
3. When mixing the ingredients, firstly mix the A material and the B material into the barrel according to the ratio of 1:3, stir and mix evenly, then slowly add the C material while stirring until it is stirred into a uniform clay.
Third, the construction instructions:
1. According to the construction requirements, apply the prepared glue to the repaired part with a spatula. When applying, it should be smeared with compaction. After 3 to 14 days of completion, it can be put into use.
2. The reference dosage is about 1.7kg/m3.
Epoxy resin clay precautions
1. The prepared glue should be used up within 45 minutes. It is strictly forbidden to use the cement which is not evenly mixed or has been in the initial setting state.
2. A material and B material will appear slightly stratified after storage for a long time, and should be shaken before use.
Epoxy resin clay packaging and storage
1. The standard packaging specification is: 20kg±0.5kg/barrel, non-combustible, non-explosive, and can be transported as general cargo.
2. This product should be stored in a dry, cool place with a storage period of 6 months. 