EPS expansion polystyrene board thin plastering exterior wall insulation is made of polystyrene foam board (hereinafter referred to as benzene board) as the external thermal insulation material of the building. When the main structure of the building is completed, the benzene board is pressed with special bonding mortar. Ask to paste the wall. If special reinforcement requirements are required, they can be anchored with plastic expansion screws. Then apply a polymer cement mortar on the surface of the benzene board, which is pressed into an alkali-resistant plastic fiberglass mesh to form a protective layer of crack resistant mortar, and finally a decorative surface layer of putty and paint (if the decorative surface is tile) Should be changed to galvanized steel mesh and special tile adhesive, grouting agent). EPS expansion polystyrene board thin plaster exterior insulation system has superior thermal insulation performance, good waterproof performance and wind pressure resistance and impact resistance, which can effectively solve the problem of wall cracking and leakage. The system is mature in technology, convenient in construction and cost-effective. It has been widely used in developed countries and developed coastal areas in Europe and America. It is the first choice for real estate developers, thermal insulation and energy-saving building design and construction unit. With the in-depth development of building energy conservation, this system will become the mainstream product in the market. The corresponding standard procedures: "Expanded polystyrene board thin plastering exterior insulation system" JG 149-2003 Neodymium Magnet,NdFeB Magnet,Ferrite Magnet Sunxal Magnetics Co., Ltd. , http://www.hlmagnets.com