Feedwater pump minimum flow recirculation regulator overview

The minimum flow rate to the pump recirculation control valve, also known as high pressure regulator valve, which is a novel structure of the control valve. STC water pump minimum flow recirculation control valve is an air-conditioned multi-stage throttling control valve, the valve is mainly used for large generating units on the water supply system is to prevent boiler feed water vaporization of the important equipment, but also the power plant key control valve one. Cascade-type minimum flow recirculation valve has the following advantages: 1. Fluid step-down, the fluid direction changes, increasing the flow resistance to prevent flow of liquid pressure reached 24MPa does not appear cavitation. 2. Valve spool 5 throttling, valve seat sealing surface to set a throttle plate, STC water pump minimum flow recirculation regulating valve has a cascade structure and two types of labyrinth structure. The fluid passes through tortuous passages with the purpose of consuming fluid energy, reducing flow rate and preventing liquid cavitation. To improve the fluid flow state, control the flow rate of about 30m / S. 3. Throttling surface and the sealing surface separate, spool, spool sleeve and throttle plate by the hardening treatment, the surface hardness of about HRC70, close tight, long life. 4. The valve core surface has a large gap, even if the liquid contains 2 ~ 3mm slag and other solid particles, the valve core will not be stuck, flexible action.

Rubber coating measuring tape

Custom Tape Measure,Rubber Measuring Tape,Carpenter Tape Measure,Craftsman Tape Measure

HENAN SHIJI HUALIAN TOOLS AND MEASURE CO.,LTD , https://www.hnsjhl.com