Floor lamp is a type of furniture lighting. However, as people's living standards continue to improve, people's concept of life is constantly changing, indoor lighting has become the main element of Modern Home decoration design, floor lamp is to create a corner atmosphere the best lighting, and Floor lamp technology continues to innovate and mature, and gradually integrates into our public life. The following small series introduces floor lamp maintenance techniques and floor lamp installation methods. Floor lamp maintenance tips 1, moisture-proof The most worried about electric items is the dampness, which will reduce the service life, and it will also have the danger of electricity. Therefore, the key step in the maintenance of floor lamps is dampproof, whether it is placed in the living room, or the lighting of the bathroom, bathroom, or the kitchen stovelight. , We must install a moisture-proof lampshade to prevent moisture intrusion, causing rust damage or short circuit in the lamps and lanterns. 2, dust removal Maintenance of floor lamps often requires dust treatment, especially lamp shades of floor lamps. The lamp shades can easily accumulate gray layers and cause darkening, which affects lighting effects. Therefore, they must be cleaned frequently. When cleaning floor lamp shades, use a clean feather duster to gently remove dust and do not deform the shade. 3, do not switch frequently When using lighting, try not to switch as often as possible. Because the current of the lighting is frequently activated, the current through the filament is greater than the current during normal operation, so that the filament temperature rises sharply to accelerate sublimation, which will greatly reduce its service life. One point to pay attention to in all lighting maintenance. Floor lamp installation method 1, before installation Read the installation drawing and the product specification of the floor lamp carefully before installation, and prepare common tools for the installation of the luminaire, such as a flat cross-head screwdriver and a hoe. It is best not to confuse after unpacking the parts. If there are many similar parts, the general installation drawing will draw a comparison chart of the actual size. Crossing the unused parts will make it easy to distinguish the various parts. 2, pre-installation inspection Before installation, check the status of the accessories such as a floor lamp. If you find that the floor lamp plate is damaged, you can contact the merchant for repairs. Where the screws, eccentrics, and wooden shafts are to be installed, the guide holes will be opened, and there is no need to worry about the positioning of the parts. It should be noted that there should be no cases where the wrong part is re-inserted, and then it is easy to damage the plate. The installation is also often unstable, tilting and so on. 3, install the floor lamp Usually the floor lamp should have a cast iron chassis, which is slightly smaller than the surface base. The black plastic cap should be the fastener used to fix the lampshade. The order of parts from bottom to top should be: chassis fastening nut, cast iron chassis, base , lampposts, lamp holders, lampshades, plastic fasteners, light bulbs. Classification of floor lamps 1, direct-type floor lamp The light is concentrated, the local effect is obvious, and the range of influence on the surroundings is small. The light of the lamp shines down on the ceiling and spreads evenly indoors. This kind of "indirect" lighting method, the light is softer, and it can make people relax to a certain extent. The use of this type of lamp is quite common in some popular modern minimalist home designs. 2, on the floor lamp When using a floor lamp, the ceiling in the home is preferably white or light-colored. The ceiling material is preferably reflective. In this case, the light will be much softer, and the range of influence will be larger. Editor's summary: The floor lamp maintenance techniques and floor lamp installation methods are introduced here, and we hope to help everyone. If you want to know more about yourself, you can follow the information on this site. Floor lamp floor lamp maintenance tips
A. Definition:
B. Design theory:
C. Advantages to use EPS Foam Sandwish Panels:
Osb Sip,Sandwich Panels,Insulated Sandwich Panel,Sandwich Roofing Sheets,structural insulated panels, OSB facing sandwish panels,high-performance insulation material Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com
SIPs are high performance thermal efficient composite panels which consist of a sandwich of two layers of structural board with an insulating layer of foam in between for walls, roofs and floors in new residential and commercial buildings.
product_1Structural Insulated Panels (SIPs) have become a widely used alternative construction material for homes and other buildings. While many types of Composite Panel building systems have been developed, SIPs now usually refers to panels made from a thick layer of foam (polystyrene or polyurethane) sandwiched between two layers of Oriented Strand Board (OSB), plywood or fiber-cement. The result is an engineered panel that provides structural framing, insulation, and exterior sheathing in a solid, one-piece component.
The basic design concept for SIPs is elegant in its simplicity, and offers several advantages for constructing walls and roofs. Bonding the foam core to the stiff outer skins creates a web-and-flange structural strength (along the same principal as an I-beam) across the length and breadth of the panel. With the capacity to handle axial, bending, racking, and shear loads, properly designed and assembled SIPs not only replace conventional framing, but will withstand high wind, and seismic forces.
Architectural Benefits
High quality construction method.
Comfortably warm, clean, and quiet.
Cost Benefits
Equal or lower first costs.
Lower long term operating costs.
Incentives available from utility service provider for energy efficient design.
Lower maintenance costs for you.
Construction Process Benefits
Easy to construct, with short learning curve.
60% shorter construction time
Quick turnaround time for greater satisfaction.
Increased builders production capacity.
Environmental Benefits
50% less framing lumber.
50% more energy efficient.
Requires less room at building site (less site disturbance).
Less construction waste.
D. Usage:
SIPs are prefabricated systems used primarily for walls and roofs. SIPs employ composite materials, reduce waste through modular construction methods, achieve high insulation