Japan's Graphic Products has introduced the new 3D CAM software "tools V3 Ver.3.3.1" for mold processing and the new CAM software "tools MX Ver.1.3.1" for 5-axis machining. Both new softwares have expanded their capabilities around the topic of reduced processing time, especially in large mold production. At the same time, "SculptureCAM HOLE" was introduced as a new optional module for drilling. In terms of price, if all the basic functions are fully configured, tools V3 is 5.2 million yen (excluding tax), and tools MX is 6.4 million yen (excluding tax). The SculptureCAM HOLE module is 800,000 yen (excluding tax). Both tools V3 and tools MX have "optimized extensions", "enhanced CAM engines", and "expanded CL editor features". In terms of optimization and expansion, the "Continuous Move G00 Conversion Function" is equipped to shorten the machining time by converting the continuously moving part of the long distance movement to G00 (rapid feed). In addition, the “horizontal arc feed editing†function has been added. By changing the horizontal arc feed into a three-dimensional arc feed, it can not only reduce the tool load during the feed, but also avoid the tool load. Into the knife traces. In the CAM engine enhancement, the "remaining processing: F value expansion function" has been added. With this function, the F value can be set separately for the ridge direction and the orthogonal direction. The machining time can be shortened by increasing the F-direction of the ridge direction with a small load. As an extension of the CL editor, by adding the "infeed path change function", it is not necessary to re-operate CL in the change of the infeed and retract. The SculptureCAM HOLE module focuses on versatility and freedom and is capable of multiple drilling operations. The hole shape can be identified by different CAD data, and the hole shape can be generated according to coordinates, points, circles, arcs, curves, and curved surfaces. Supports a variety of cutting modes such as fixed cycle, chamfering, and G01 drilling cycle. At the same time, it also provides simulation functions for 2.5D and 3D CAM cutting, and can perform interference detection on drilling actions and tools. In addition, the movement between the holes can be optimized with reference to the leakage condition to avoid interference with the start and end of the drilling and the workpiece. Komatsu Filter,Komatsu Fuel Filter,Komatsu Excavator Filter,Komatsu Genuine Filter JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.huaxinbrush.com