Guangdong children's furniture random inspection batch qualified rate is less than 70% worrying

Before the Children's Day on June 1st, the Guangdong Quality Supervision Bureau randomly checked 202 batches of children's toys, children's clothing and children's furniture produced by enterprises in Guangdong Province, and 138 batches were qualified, with a batch pass rate of 68.3%. Excluding only marking unqualified 12 For batches, the intrinsic quality pass rate is 74.3%.

This time, a total of 62 batches of children's furniture produced in Foshan, Dongguan, Shenzhen and other cities were inspected, 42 batches were qualified, and the batch pass rate was 67.7%. Random inspection of children's homes has three varieties, including children's wooden cabinets. The pass rate of children's wooden cabinets is low, only 59.5%.

A random inspection found that there are 2 batches of products with heavy metals exceeding the standard requirements. The heavy metals in furniture are mainly lead, cadmium, chromium, etc., which are harmful to human body, especially children. The "Sunlight Rain" brand No. 301 children's bedside table produced by Shenzhen Gangdahao Furniture Co., Ltd. has a measured soluble lead value of 3560mg / kg, which is nearly 40 times higher than the standard requirement of ≤90mg / kg, and a measured value of soluble chromium is 772mg / kg, which exceeds The standard requirement is ≤60mg / kg nearly 13 times. The main reason is that the production enterprises did not inspect the raw materials and used inferior paints and coatings. There are 17 batches of products with unqualified mechanical properties. For example, the strength of the drawer slide of the bedside table and the vertical loading stability of the movable parts do not meet the standard requirements. These products are easily deformed soon after use, and some will be seriously deformed, affecting the use or not being used. There are also individual products whose formaldehyde emission exceeds the standard requirements, and the physical and chemical properties of the paint film are unqualified.

In response to the quality problems found in the spot check, the Guangdong Quality Supervision Bureau has ordered the children ’s products manufacturers with outstanding quality problems to immediately stop producing and selling unqualified products. The 11 products found in the spot checks have hidden safety risks and children with unqualified toxic and harmful indicators Article production enterprises shall be transferred to the inspection department for investigation according to law. The relevant municipal quality supervision bureau will increase the supervision and random inspection of the quality of children ’s products, follow up and implement the case handling, and effectively maintain the health and safety of children.

PCR Strips

Thin-Walled Polypropylene PCR strip tubes
As one of the largest manufacturers of PCR strip tubes in China for over a decade, we have been supplying PCR 8 strip tubes and PCR single tube to our international customers.
As these PCR tube strips have thin and uniform walls, they can fit in different types of thermal cyclers. As a next step, we are also planning to develop PCR tube strips with attached caps, also called PCR strip tubes with individually attached caps.
More info about PCR strip tubes:
What Are PCR strip tubes?
PCR strips tubes allow scientists working with cyclers and enzymes to gain enhanced PCR yield through a faster transmission of heat from block to the reaction. It offers better control over the reaction while speeding up the process with high heating and cooling rates.

8 Strip PCR Tubes,8 Strip PCR Tubes With Caps,PCR Tubes 0.2 ml 8 Tube Strips,PCR Strip Tubes,PCR 8 Strip Tubes

Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yongyuemeds.com