4mm Stainless Steel WireRope,1/8 Stainless Steel Wire Rope,2mm Stainless Steel Wire Rope Jiangsu Dingtian Stainless Steel Products Co., Ltd. , https://www.dingtiancasting.com
Originally, when the stainless steel chain plate worked too fast, the stainless steel chain plate slipped. When the stainless steel chain plate slipped, it could start slowly. If squirrel cage electricity is used, it can be initiated twice before it can be used to defeat the slippery appearance. There are many situations where stainless steel chains slip. Stainless steel chain plate initial tension is too small. The tension of the conveyor belt off the drum must not constitute slippage of the conveyor belt. This situation usually occurs at the time of initiation. The method of treatment is to adjust the tensioning device and increase the initial tension. The friction between the stainless steel chain plate drive roller and the conveyor belt does not constitute slippage. The reason for this is that most of the reason is the water on the conveyor belt or the environment is wet. The method is to add some rosin to the roller. However, it is necessary to pay attention not to use hand blows, and use blower equipment to blow in to prevent personal accidents. Stainless steel chain plate tail roller bearing damage does not turn or upper and lower roller bearing damage does not turn too much. The reason for the formation of damage is that there is too much buoyancy at the end, there is no timely repair and replacement of components that are now damaged or insensitive to rolling, so that the increase in resistance constitutes slip. The load on the stainless steel chain conveyor belt is too large, and slipping beyond the electric capacity is also possible. The advantage of slipping at this time is that it protects the electricity. If not, electricity will be burned for a long time. But for work, it is a slippery accident. To defeat the slippery appearance of the conveyor belt, we must first find the cause of slippage before we can use a useful method.
How to maintain the reasonable running speed of stainless steel chain plate to prevent slipping
Stainless steel chain plate can be used as a transport equipment for many professions, such as coal, grain, flour processing plants, etc. Stainless steel chain plates can transport bulk materials as well as bagged materials. We all know that for the stainless steel chain plate, slippery appearance is very common. Then, consumers will ask this question: When the stainless steel chain plate work too fast, will it not form the appearance of stainless steel chain plate slipping?