How to make the failure of the tensile testing machine operation

How to make the fault pull test machine in the operation of the tensile tester in the daily life operation process, there will be many problems, the common one is the computer software, and the prompt box information shows overload. The solution is to check whether the communication line between the computer and the test machine is off; check whether the online selection sensor is selected correctly; check whether the sensor has been knocked when the most recent test or keyboard is operated; check whether the software calibration or calibration function is used before the problem occurs; Check if you have manually changed other calibration values, calibration values, or other information in the hardware parameters. The main power of the test machine is not bright and cannot be moved up and down. The solution is to check whether the power supply line connected to the test machine is connected properly; check whether the emergency stop switch is in the screwed state; check whether the power supply voltage of the access test machine is normal; check whether the fuse on the machine socket is blown, please take out the spare fuse Just install it. The main power of the test machine is powered but the device cannot move up and down. The solution is to check if the device is still unable to move after 15S (time), because the host needs self-test after booting, it takes about 15S time; check whether the upper and lower limits are in the proper position, there is a certain running space; check the access test machine Whether the power supply voltage is normal. The main machine of the test machine adopts the double-screw middle beam transmission mechanism, the hydraulic cylinder is placed underneath, the installation sample is convenient, the stability is good, and the shape is beautiful. The fuel tank adopts a fully enclosed structure, which can effectively prevent dust and other debris from entering the hydraulic system, thereby improving the hydraulic pressure. System reliability. The digital display universal testing machine adopts the liquid crystal display measuring system, and the test mode can be selected through the panel buttons to set a plurality of test parameters. Http://news.chinawj.com.cn Submission:

RAPIER LOOM

SJ736J rapier loom with 6 shaft upper positive cam dobby is weaving jute fabric. Machine is running more stable and faster than usual.

mainly for Bangaladesh and Indian market . machine body is much heavier and get longer life and smooth running with lower maintainence.

rapier loom,rapier machine,rapier loom machines,vamatex rapier loom

Shaoxing Sunfong Intelligent Equipment Inc. , https://www.zjsxsunfong.com