Inorganic heat-resisting high-temperature paint set off the world of chemical technology storm

As more and more new materials come into our sights, apart from their practical considerations, we should also have a clear measure of their own performance and quality. The water-based heat-resisting high-temperature paints that have recently received extensive attention are based on the use of silicates and silica sols derived from nature. They are not only of abundant sources, but also have less environmental pollution, and are generally made into environment-friendly water-based paints, which are environmentally friendly and energy-saving. It is not surprising that people are favored by people. In fact, water-based inorganic anti-corrosion coatings have come out very early. They have excellent anti-rust properties, long service life, and excellent environmental protection. With the development and innovation of technology, people began to use the characteristics of inorganic materials such as heat-resisting, fire-retardant, and mildew-resistance and flame-retardant, and gradually applied water-based high-temperature coatings to exterior walls and interior walls of buildings, and they have developed very well in China. In particular, the successful application of heat-resistant and high-temperature coatings in the industry in recent years has not only improved the company's production process and protected high-temperature equipment, but also saved a lot of resources. Beijing Zhisheng Weihua Chemical Co., Ltd., as a well-known large-scale manufacturer of heat-resisting and high-temperature coatings in China, has achieved pleasing results in R&D technology, experience and performance.

In recent years, the coatings industry at home and abroad have attached great importance to the development of water-based heat-resisting high-temperature coatings. They have made breakthroughs in technology and achieved certain research results, because there are fewer organic latex resins used for toughening in formulations (<5%). Therefore, most people have deeper research on the mechanism of their film formation. As a film-forming material in inorganic coatings, silicates and silica sols can automatically infiltrate into the cement surface, so that the coating containing pigments and fillers is silicified under the action of a curing agent and firmly combined with the substrate, at a temperature of 1200°C or more. It is still heat-resistant and will not crack and peel unless the cracking of the substrate cracks the coating of the inorganic coating, but even this will not peel off. Zhishui Weihua's water-based heat-resisting high-temperature paint adopts its own special high-temperature solution, which can reach a high temperature of 1800°C.

Water-based heat-resistant high-temperature coatings have been used in Europe for more than 20 years of R&D production history, and China has more than 10 years of R&D development. Water-based heat-resisting high-temperature paint itself has the characteristics of fire retardant, anti-aging, reflected light, no fading, and is resistant to acid and alkali, and does not breed mold or algae. Can also be made into a respiratory coating, with self-cleaning function and water resistance, like the skin of human beings is not water seepage, but also can make the moisture in the substrate evaporate and discharge, the substrate is kept dry, the coating film is not blistering, not pan Yellow and peeling. The construction is simple, without primer, spraying or brushing. This is a kind of very promising paint, which may cause chemical storms.

In addition, the water-based heat-resisting high-temperature paint has no peculiar smell, no burning, no special requirements for construction and transportation, and has various functional features such as heat insulation, anti-corrosion, anti-oxidation, radiation protection, anti-ultraviolet radiation, fire retardant and so on. Compared with traditional ordinary environmental protection coatings, it has more market advantages, higher technological content and better market prospects. Now all countries in the world are accelerating the research and development of water-based heat-resisting high-temperature coatings, especially in Japan, Europe and other countries. As the representatives of heat-resistant and high-temperature coatings in China in recent years, Beijing Zhisheng Weihua Water-based heat-resisting and high-temperature coating technology has been in the world. Forefront, application performance has spread all over the country, and also exported to the United States, Europe, Central Asia and Arab countries.

In addition to focusing on water-based heat-resistant high-temperature coatings to maintain environmental protection, energy saving, low-cost, high-quality development direction, domestic enterprises should also take advantage of the country's vigorous support for industrial upgrading as an opportunity to organize high-tech chemical talents with funds in place. Focusing on R&D, the global chemical industry is storming.

Control Valve

This column mainly shows the excavator Control Valve parts. We provide Hydraulic Main Control Valve for Kawasaki, Kayaba, Parker, Rexroth, Komatsu, Commercial, Vickers, etc. We provide low priced Excavator Control Valve from China.

We are a professional manufacturer of hydraulic accessories for crawler excavators Professionally provided aftermarket customers with various brands of crawler Excavator Final Drive, Travel Motor , Travel Gearbox, Swing Device , Swing Motor ,Swing Gearbox,hydraulic pump, main control valve and other accessories.Strictly controlling the quality acceptance of each product Standards to ensure high-quality qualified export of each product.At the same time, we can customize the production services of the products through the drawings according to customer needs, and make every effort to make the perfect product in the mind of each customer.

1. Focus on the machinery industry over 15 years, have abundant experience and sound reputation in the field. support full ranges of excavator accessories.

2. offer Maintance service: Repairing and testing for monitor ECU controller software; Engine start testing,
remanufacture and repaint, refit; Hydraulic pump refit etc.

3. 100% quality guaranteed, offer different quality requirements Excavator Parts. new and used genuine parts, OEM parts made in China Japan Korea. main parts normal operation running at least 3-5 years.

4. Small order and sample order are acceptable, Large quantity and price negotiation

If you want to know more about our products in more detail, please click on the product details to see more information about product quality, price, packaging, transportation, etc., or you can directly click on Contact Now on the page to talk to us directly. Looking forward to starting long-term business cooperation with you!

Excavator Control Valve

I am very grateful for your very serious evaluation of the product and your affirmation of my work. I will continue to provide you with good products and services to repay your trust. Thank you very much.

Main Control Valve,Automatic Control Valve,Excavator Control Valve,Excavator Pilot Control Valve

Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.juheng-cn.com