Hanmas Furniture News News At present, due to its environmental protection, beauty and comfort, the wooden floor is getting more and more popular, and the purchasing rate is getting higher and higher. Moreover, with the growing spread of retro feelings, it has increased the sales of wood flooring. The benefits of wood flooring are self-evident, but the difficulty of maintaining wood flooring is also plaguing most people. Therefore, today Xiaobian shares the maintenance methods for general solid wood furniture and valuable solid wood furniture. General wood furniture maintenance methods: 1. Dust removal: Always remove dust, because dust will rub the surface of solid wood furniture every day. It is best to use a clean soft cotton cloth, such as an old white T-shirt or baby cotton. Remember not to wipe your furniture with a sponge or tableware. When dusting, use cotton cloth that has been wrung out after wetting, because the wet cotton cloth can reduce friction and avoid scratching the furniture. It also helps to reduce the adsorption of dust by static electricity, which is good for removing dust from the furniture surface. However, water vapor should be avoided on the surface of the furniture. It is recommended to wipe it again with a dry cotton cloth. 2, cleaning: In order to remove the surface of the furniture caused by airborne pollutants, cooking fumes, smudges during operation and traces caused by glazing, we recommend the use of special furniture cleaners. This solvent can also help remove excess wax. 3, waxing: regular waxing, every 3 months, a layer of wax for the furniture. Before using the glazing wax in the furniture, check if the surface of the lacquer is intact. For newer solid wood furniture, first wipe the surface with a fine cotton cloth. For stains that have been left for too long or difficult to remove, use a cotton cloth with a small amount of gasoline or alcohol. Then use a small piece of cotton cloth to spread a large amount of glazing wax, and then use a larger dry cloth to wipe the wax evenly in a circular block. Before waxing, use a milder non-alkaline soapy water. The old wax is wiped off, and the waxing is not too dense, otherwise it will block the pores of the wood. Excessive waxing can also damage the appearance of the coating. 4, repair scars: put on the paint surface of the wet tea cup often leave an annoying watermark, how can you quickly remove them? You can put a clean wet cloth on the watermark on the desktop, and then use the iron on the top Ironing at a low temperature allows the moisture that penetrates the paint film to evaporate, thereby causing the watermark to disappear. However, when using this method, the rag used should not be too thin, and the temperature of the iron can not be adjusted too high. Otherwise, the watermark on the desktop disappears, but the branding can no longer be removed. If you are not careful, wooden furniture is likely to leave hot marks, do not panic, in general, as long as it is wiped with a rag in time to remove. However, if the hot marks are too deep, you can use iodine to gently apply it on top, or apply Vaseline oil on it, and then wipe it with a soft cloth every other day to eliminate the hot marks. 5, daily care: to avoid letting the sun shine on the furniture surface for a long time, or it is easy to make the internal moisture of the wood out of balance and cause cracks; in the dry environment in autumn and winter, it is necessary to regularly use artificial humidification measures to supplement the excessive loss of water. If you often use a soft cloth to wet the water, wipe the furniture, etc.; maintain good humidity, the ideal humidity is about 40%, if you use cold air for a long time, you can put water next to it. The temperature difference should not be too large, avoiding the air conditioner opening and closing, causing the temperature to change drastically; the overheated items should be avoided directly on the furniture surface, which will damage the protective paint and wax on the furniture surface. Maintenance methods for expensive solid wood furniture: 1, rosewood furniture rosewood wood is the king of wood, the water inside the wood, the air humidity will shrink, too high will expand, so do not put it in too dry and humid place, the surface should avoid rubbing with hard objects, so as not to Damage to the paint surface and the surface texture of the wood. The look of red sandalwood is that it is often wiped and the gloss is better, but don't rub it with a wet rag or a rough rag. 2, Huanghuali furniture wood is hard, thick and not thorn, can feel oily, heavy fragrance. Do not use heavy loads on the huanghuali wood furniture for daily use to avoid distortion of the furniture. Do not wipe the huanghuali products with a damp cloth, or use alkaline chemicals or alcohol-based chemicals. When moving the huanghuali furniture every day, be sure to gently lift it. Do not pull hard. 3, rosewood furniture In the two or three years of initial use, a full waxing treatment was carried out with solid floor wax during the season. After a few years of "pasting" phenomenon, there is no need to wax. It is best to use a coarse cloth when wiping, and the surface of the furniture will be more shiny and smooth. There are many places for carving and hollowing out in rosewood furniture, and some places are difficult to handle with cloth. Just rub it with a shoe brush and the harder the brown hair of the brush is. 4, chicken wing wood furniture Its wood grain is the most beautiful kind of wood, the material is fine and hard. There is a temperament of ancient times. Usually the furniture is dirty. It can be wiped gently with a slightly moist cotton cloth for several times. It can be cleaned with salt water every three months by blending salt and mineral water and pouring it into a cup or bowl. It can be maintained for three months for each purification. 5, iron pear wood furniture Iron pear wood is resistant to corrosion and wear, although the price is not expensive, but the ancient temperament is widely loved by everyone. The finished furniture should not be exposed to the sun, nor should it be close to the high temperature places such as the heater. The indoor temperature should be maintained at 70%-80%. When wiping the dust, soft cotton cloth should be used. If the floor of the room is not flat, you can use a small wooden block to level the ground to prevent long-term furniture deformation. The above is the information about the maintenance of solid wood furniture, want to know more furniture information, please pay attention to Hanmasi furniture Source: Hanmas Furniture related articles How about a half-day sofa bed? Hanmas tells you Hanmasi furniture, general manager's office decoration Feng Shui layout Han Marx: The price of the desk was originally affected by these effects. After reading the farewell, "buy, buy and buy" Hanmas Furniture teaches you how to distinguish the use and advantages and disadvantages of office curtains Hanmas Furniture teaches you how to place your desk items With the development of living quality , lighting fixture is becoming increasingly intelligent . So in this case , WOSEN launches led smart panel light .The function of smart led panel light ultra thin are as follows :
Select 16 million colors by app easily
Led Smart Panel Light,Led Wafer Light,Led Flat Panel Light,Smart Led Panel Light WOSEN LIGHTING TECHNOLOGY LIMITED , https://www.wosenled.com
1. Voice Control
Control connected smart led flat panel light trim by voice command working with Alexa and Google Assistant
2. Time Setting
Schedule your lights turn on or off at setting time
3. App Dimmer
Adjust proper color temperature by voice command or app
4. RGB Control