When we are decorating, tiles are used in many places. However, during the renovation, it often appears that the purchased tiles are not enough, causing the budget to keep rising. The estimation of tiles is wrong. On the one hand, it is due to our calculation errors. On the other hand, due to our extravagance and waste, in fact, as long as the construction process is good. , we can not only avoid waste, but can even save! First, estimate the number of tiles used Find a designer, choose the right size, and draw a row of bricks. Calculate the number of tiles according to the figure, plus the normal construction loss. Is the shop 600? 800's? Or 1000 or other specifications? this is a problem! The current floor tiles, especially the floor tiles used in the living room, are mainly 500mm, 600mm, 800mm, and 1000mm (ie, 1 meter), among which 600mm and 800mm are the most used. How to choose? It is recommended to choose according to the area of ​​the paving and the placement of the furniture. Since 600mm bricks per unit area have more bricks than 800mm bricks, the space can be expanded visually. At the same time, the waste rate when laying corners is lower than 800mm bricks, while the space is large 800. Even 1 meter bricks look atmospheric. Therefore, it is recommended that the space of less than 40 square meters choose 600mm specifications of the floor tiles; and more than 40 square meters of space can choose 800mm or one meter of floor tiles. It is worth noting that if you have too much furniture (such as a bedroom) in your room and you cover a large piece of floor, it is best to use a 600mm floor tile. Second, use easy-cut tiles Select varieties that do not require high levels of "fight to suit" and "fight to match", so that the cut half (or edge) can be used elsewhere. Third, optimizing the decoration design Adjust the design of the plane and facade to avoid the need to cut tubes, small corners, and cut tiles that are easily damaged and waste tiles. ceramic tile
Modular
houses are created in sections, and then transported to the home site for construction
and installation. Although the sections of the house are prefabricated, the
sections, or modules, are put together at the construction much like a typical
home. Quick installation is the primary advantage of Modular Building as most
of the interior decoration was done in the factory. Zhongda has manufactured
modular houses for the US, Australia, and the UK projects in varies of building
types such as hotels, apartments, and villas etc. Modular Building Modular Building,Modular House,Modular Office Building,Modular Building Construction Zhongda Steel Structure , https://www.zhongdametal.com
It is hard to learn how to use these 6 strokes!
1 2 Next> Total 2 Page
Page to page