Pan Head Screw,Pan Head Sharp Screw,Phillip Pan Head Sharp Screw ,Pan Phillips Head Screw Handan Jiankun Hardware Products Co., Ltd / Handan best import and export trade co., Ltd , https://www.jkscrew.com
Liquid booster pump works
Liquid booster pump can be achieved in the booster water heater, high-rise low-pressure, sauna, bath and other pressure with the pressure on the top of the apartment under the pressure of inadequate water pressure, solar automatic pressure, reverse osmosis net Turbocharged with the use of other fields. As China's economy and people's living standards improve, the demand for such products more before, more and more professionals have noticed that the promotion of such products focuses on the introduction of the working principle of the product. So how should the liquid booster pump work? Will be introduced next. Liquid booster pump works First, the booster pump is filled with liquid, and then start the centrifugal pump, the impeller rotates quickly, impeller blades drive liquid rotation, the liquid rotates to rely on inertia to the outer edge of the impeller flow, while the impeller sucked into the suction chamber In this process, the liquid in the impeller flows around the flow vane and acts on the vane in the flow around the flow, and the vane acts on the liquid with an equal and opposite force to the lift, Liquid work, the liquid energy and out of the impeller, then the kinetic energy and pressure of liquid are increased. A very low pressure is applied to the large diameter air driven piston, creating a high pressure when this pressure is applied to a small area piston. Through a two-way five-way control valve, booster pump to achieve continuous operation. The one-way valve controlled by the high-pressure plunger constantly liquid discharge, booster pump outlet pressure and air-driven pressure. When the pressure between the drive section and the output liquid section reaches equilibrium, the booster pump stops operating and consumes no more air. When the output pressure drops or the air-driven pressure increases, the booster pump will automatically start running until it reaches the pressure balance again after the automatic stop. The use of single gas-controlled unbalanced gas distribution valve to achieve automatic reciprocating pump, gas drive part of the pump body made of aluminum. Wetted part of the media according to different choice of carbon steel or stainless steel. General pump has intake and exhaust two ports, the inlet can produce atmospheric pressure is lower than atmospheric pressure called "negative pressure"; in the exhaust can produce higher than atmospheric pressure called "positive pressure"; such as Often said the vacuum pump is negative pressure pump, booster pump is positive pressure pump. Positive pressure pump and negative pressure pump are very different. Liquid booster pumps are a relatively new type of equipment that, with the birth of such products, has grown considerably in many areas, contributing a great deal to the strength of our country's technology and economy Protection. How to further research and upgrade these products later attracted more attention.