Membrane Industry Co., Ltd.'s film coating technology, characteristics of coated iron products, use

Coating technology

Non-adhesive, solvent-free, using GPS liquefied gas, through the flame heat treatment method, completely through the hot pressing to achieve the film and the metal plate surface, after cooling, made of coated steel.

Film Technology Schematic
3, combustion only produces water and CO2, does not produce dioxins
English, the product can be recycled directly after recycling;
4, in line with GB standards;
5. The PP film used in food cans and beverage cans has obtained FDA certification;
Casing post-welding film coating

Film coated steel product features:
1. It is not necessary to carry out chemical conversion treatment on the metal plate or make primer or change the properties of the fluororesin film, so that a laminated metal plate of laminated fluororesin film can be manufactured;
2. The fluororesin film can be well bonded to the metal plate, and has the characteristics of corrosion resistance, anti-pollution, anti-adhesion, abrasion resistance, processability and material rigidity;
3, does not use expensive adhesive adhesive layer, the product's production costs are lower;
4, safe, clean, free from harmful substances, the product can be used directly as a renewable resource after recycling;

Film covered food cans
5, in line with GB standards;
6, white / transparent PP food-grade coated steel plate, passed the FDA's identification standards, FDA's identification standards are: boiling test TFS / PP, 135 °C / 40 points;
For can products, the type of film that can be used is PE film, P P film, PET film, nylon film, etc.
The security of the film used for can products is:
1. The film's stretchability and heat resistance are all rigorously designed and tested to have strong anti-destructive properties;
2, does not contain bisphenol A substances and methyl phthalate and other environmental hormones;
A vacuum bag-like effect is formed, and the contents do not leak at all. Solve problems such as poor resistance to poor content, weak adhesion, and air bubbles during the painting process.
use:
1, cans products:
(Longitudinal) blank film coating technology, applicable to all kinds of 3 cans can making, 2 cans making cans, top and bottom lid cover;
Specific: Food cans, beverage cans, chemical cans, crown caps, unscrewing covers, beer caps, special-shaped cans, aerosol cans, decorative cans, etc.;
In particular, the contents are acidic or high in sulfur-resistant foods and beverages, such as tomato sauce, steamed beef, and mushrooms. This ensures the safety of foods, reduces processing steps, and reduces costs.
2, home appliances: use fluororesin membrane, fluororesin membrane thickness 140μ ~ 180μ;
Electric water heater body part, rice cooker body part, freezer cabinet door part;
3, interior and exterior decoration of building materials: the use of fluoroplastic film, the thickness of fluororesin film 140μ ~ 180μ;
Can be used to decorate outer walls of buildings and roofs, shading of exterior buildings, indoor ceilings, interior floors, indoor shade, fire/security doors, elevators, microwave oven inner plates, rice cooker inner plates, gas stove top plates, The hood material, the outer panel of the road, medical equipment, etc., replace the existing spraying process.
4. It is used in the exterior of cars and trains for replacing the painting process. The fluororesin membrane is used. The thickness of fluororesin membrane is 180μ~
Advantages of interior and exterior decorative building materials coated steel plate:
1 It does not use adhesives and solvents, and it plays an environmentally friendly, safe and healthy role in preventing residential syndrome.

Building material coated steel plate
2 It has soundproof and flameproof effects;
3 Excellent weather resistance, due to the improvement of the raw material propylene, even if the outdoor environment is more cruel, the gloss and color will not change in 15 years;
4 excellent processing, can be applied to metal, plastic and other substrates, and apply to 2-dimensional, 3-dimensional forming. Good formability such as 180-degree bending at room temperature and 3-dimensional cold rolling plate forming has been confirmed in the past.
5 The change of surface gloss is minimal, and there is no localized bleaching;
6 rich design, can have a strong sense of satisfaction on the texture of the coating.
7 According to the needs of customers, make a variety of patterns;
8 High transparency, also applicable in the optical field;
9 The surface hardness can be selected, and the surface hardness can be selected according to the change of the film and the use.
10 Pencil hardness up to 4H, can play solvent resistance, chemical resistance.

Non-adhesive, solvent-free lamination processing technology and traditional lamination processing technology comparison:
Non-adhesive, solvent-free coating technology:
Metal plate + plastic film Heat-pressed Coated metal plate (safe, clean)
Traditional film processing technology:
1 Metal plate + coating (including environmental hormones) Sintered coating metal plate (containing harmful substances)
2 metal plate + adhesive (containing formaldehyde) + plastic film covered metal plate (containing harmful substances)

Hcs Drill Bits For Wood

Flat Spad Wood Drill Use:For Plywood, Softwood, Chipboard And Wood


Hcs Drill Bits For Wood,Single Tip Sds Hammer Drill Bit,Wood Twist Drills,Double Wood Single Flute Drill

Changzhou Bomitools Co.,Ltd. , https://www.bomitools.com