Black Lamp,T8 Blb Light,T8 Blb Bulb,T8 Blb Tube Changxing leboom lighting product CO.Ltd. , https://www.leboomuvd.com
Multipurpose use of cyclone milling
First, the working principle of the cyclone milling thread Cyclone milling is a process equipment for efficient cutting of the thread on the lathe, suitable for large-volume thread processing. When using, remove the small tool holder on the lathe, install the cyclone milling head on the middle slide plate, and adjust the rotation center line of the cyclone head spindle to a thread rising angle to the center line of the workpiece, and then clamp the workpiece on the lathe chuck. The cutting process is a high-speed rotation of the cyclone milling head through a special motor. The rotation speed is generally 1000-1800r/min, forming the main cutting motion. The workpiece is mounted on the chuck for slow rotation. The rotation speed is generally 5~60r/min, forming the cutting process. The circular feed motion. At the same time, the cyclone milling head moves axially along with the saddle, so that each revolution of the workpiece, the cyclone milling head cuts a lead. Can process the required