Prepainted Aluminium Plate/Sheet/Coil for Refrigeration

Model NO.: 1100, 1050, 1060, 3003, 3105 5005
Alloy: Alloy
Coating Finish: PVDF, PE, Acrylic
Gloss: 10%~905
Coating Hardness: More Than 2h
MEK Resistance: More Than 100 Times
Trademark: EUALU
Transport Package: Wooden Cases
Specification: GB/T3880 ASTM
Origin: China
HS Code: 7606

Product Discription
We are the leading aluminum supplier in China, our main proudcts areprepainted aluminum sheet, color coated aluminum coil, aluminum circle sheet, aluminum chequered palste, aluminum tread plate, aluminum stucco sheet, aluminum foil, aluminum foil roll.Below is the specification of our color coated aluminum
Specification:

Paint type PVDF   POLYESTER     ACRYLIC
Thickness 0.024mm-1.20mm
Width 50mm-1700mm (Standard width:914mm, 1000mm, 1219mm)
Coils core diameter 150mm, 405mm, 505mm, 508mm, 510mm  POLYESTER>=17micron
Coating thickness PVDF >=25micron
Gloss 10-90%
Coating hardness(pencil hardness) More than 2H
Coating adhesion No lower than first grade
Impact resistance No cracking and peeling(50kg/cm, ASTMD-2794:1993)
SheetMEK resistance: More than 100 times
Advantage Flexibility
Usage Aluminum composite panel, ceiling, door and windows, electric appliance,etc.
Temper O,H12,H14,H16H18,H19,H22,H24,H26,
H28,H32,H34H36,H38, H42 H44
Alloys number 1100, 1050, 1060,
3003, 3004,3005,3104, 3105,
5005, 5052, 8011
Application ACP, aluminum, ceilings, aluminum sheets, honeycomb panels and aluminum roofing, lighting decoration,
Household electrical appliances, food package (such as pop can cover & ring-pull), furniture ect.
 
Chemical Composition %
Alloy No. Si Fe Cu Mn Mg Cr Ni Zn V Ti Zr Al
 
1050 0.25 0.4 0.05 0.05 0.05 - - 0.05 0.05 0.03 - Remainder
1060 0.25 0.35 0.05 0.03 0.03 - - 0.05 0.05 0.03 - Remainder
1070 0.2 0.25 0.04 0.03 0.03 - - 0.04 0.05 0.03 - Remainder
1100 Si+Fe:0.95 0.05-0.20 0.05 - - - 0.01 0.05 - - Remainder
3003 0.6 0.7 0.05-0.20 1.0-1.5 - - - 0.1 - - - Remainder
3004 0.3 0.7 0.25 1.0-1.5 0.8-1.3 - - 0.25 - - - Remainder
3105 0.6 0.7 0.3 0.3-0.8 0.2-0.8 0.2 - 0.4 - 0.1 - Remainder
5005 0.3 0.7 0.2 0.2 0.5-1.1 0.1 - 0.25 - - - Remainder
5052 0.25 0.4 0.1 0.1 2.2-2.8 0.15-0.35 - 0.1 - - - Remainder
5083 0.4 0.4 0.1 0.40-1.0 4.0-4.9 0.05-0.25 - 0.25 - 0.15 - Remainder
5086 0.4 0.5 0.1 0.2-0.7 3.5-4.5 0.05-0.25 - 0.25 - 0.15 - Remainder
5182 0.2 0.35 0.15 0.2-0.5 4.0-5.0 0.1 - 0.25 - 0.1 - Remainder
6061 0.4-0.8 0.7 0.15-0.40 0.15 0.8-1.2 0.04-0.35 - 0.25 - 0.15 - Remainder
6063 0.2-0.6 0.35 0.1 0.1 0.45-0.90 0.1 - 0.1 - 0.1 - Remainder
6082 0.7-1.3 0.5 0.1 0.4-1.0 0.6-1.2 0.25 - 0.2 - 0.1 - Remainder
7005 0.35 0.4 0.1 0.2-0.7 1.0-1.8 0.06-0.20 - 4.0-5.0 - 0.01-0.06 0.08-0.20 Remainder
7075 0.4 0.5 1.2-2.0 0.3 2.1-2.9 0.18-0.28 - 5.1-6.1 - 0.2 - Remainder
8011 0.50-0.90 0.6-1.0 0.1 0.2 0.05 0.05 - 0.1 - 0.08 - Remainder
Product Show

Prepainted Aluminium Plate/Sheet/Coil for Refrigeration
 


Prepainted Aluminium Plate/Sheet/Coil for Refrigeration
Prepainted Aluminium Plate/Sheet/Coil for Refrigeration

We can coat the prepainted aluminum sheet according to RAL color and Pantone color as well as other color samples

Our Office

Prepainted Aluminium Plate/Sheet/Coil for Refrigeration
Performance

The performance of PE color coated coil

 Thickness≤0.5mm
Item Test Item Standard National standard Test Result
1 Color Difference ECCA T3 ΔE≤2.0 ΔE≤1.5
2 Gloss Difference ECCA T2 ≤10 ≤5
3 Coating Thickness ECCA T1 Min 14µm ≥16µm
4 Pencil Hardness ASTM D3363 ≥HB HB
5 T-bend ASTM D4145 ≤3T ≤2T
6 Adhesion ASTM D3359 Grade 0 Grade 0
7 Impact ASTM D2794 ≥20kg.Cm ≥20kg.Cm
8 Boiling water Resistance GB/T17748 2h no change 2h no change
9 Solvent Resistance ASTM D2248 200 times paint remaining 200 times paint remaining
10 Salt Resistance ASTM B117 720 hrs≤grade 1 720hrs≤grade 1
11 Dirt Resistance GB/T9780 ≤5% <5%
12 Color retaining GB/T16259 600hrs △E≤2.0 △E≤2.0
13 Gloss weaken Level 600hrs ≤ grade 2 600hrs ≤ grade 2
14 Chalking 600hrs No Change No Change

The performance of PVDF color coated coil
Item Test Item Standard National standard Test Result
1 Color Difference ECCA T3 ΔE≤2.0 ΔE≤1.5
2 Gloss Difference ECCA T2 ≤10 ≤5
3 Coating Thickness ECCA T1 Two layers Min 23μm ≥25μm
Three layers Min 30μm ≥34μm
4 Pencil Hardness ASTM D3363 ≥HB HB
5 T-bend ASTM D4145 ≤2T ≤2T
6 Adhesion ASTM D3359 Grade 0 Grade 0
7 Impact ASTM D2794 ≥50kg.Cm ≥50kg.Cm
8 Boiling water Resistance GB/T17748 2h No change 4h No change
9 Solvent Resistance ASTM D2248 200 times paints remaining 500 times no break
10 Acidity Resistance ASTM D1308 5%HCL 24hrs No change No change
11 Alkali Resistance ASTM D1308 5%NaOH 24hrs No change color △E≤2.0 No change
12 Nitric acid Resistance AAMA620 △E≤5.0 △E≤5.0
13 Oil Resistance ASTM D1308 20#oil 24hrs No change No change
14 Salt Spray Resistance ASTM B117 4000hrs ≤Grade 1 No change
15 Abrasion resistance ASTM D968 ≥5L/μm ≥5L/μm
16 Dirt Resistance GB/T9780 ≤5% <5%
17 Color retaining GB/T16259 4000 hrs△E≤4.0 4000 hrs △E≤3.0
18 Gloss weaken Level 4000 hrs ≤ Grade 2 4000 hrs ≤ Grade 2
19 Chalking 4000 hrs No change 4000 hrs  No change
Our factory

Prepainted Aluminium Plate/Sheet/Coil for Refrigeration

Packaging

Prepainted Aluminium Plate/Sheet/Coil for Refrigeration
Advantages

1. Resonable production arrangement to make delivery very fast;
2.we are able to provide leading tolerances,metallurgical assistance,quick and reliable delivery,samples for new products,etc.
3.We have the strong capability to meet your particular requirement for the products.
4.To guarantee the quality of the products we can meet most of the standards all over the world such as ASTM standard.

FAQ


Q: What is the minimum order quantity?

A: 5 tons.

Q: What is delivery time?

A: 20~30 days after deposit. Except for public holidays.

Q: How can you guarantee the quality?

A: We have rigorous quality test system, from raw materials to finished products, the materials

must be checked and signed  by QC people.

Q: How long can I get a quote?

A: The quotation can be provided not longer than 24 hours on condition that we know all detailed

requirements.

Q:  What information should I let you know if I want to get a quotation?

 A: 1) The size of products (Alloy ,width ,thickness, application);
     
     2) The specification of the products you want.

Q: Can you provide a sample for our testing before confirm the order?

A: Yes. We can provide sample to you for approval before you place an order to us. Free sample

is available if we have stock.

Q: Can we visit your company and factory?

A: Yes, warmly welcome! we are a manufacture. We have our own factory in Anhui province China. We can book the hotel for you before you come to China .                         

Travel Kit Pouch Bags

Makeup Bag Travel Kit,Bags Tpu Zip Pouch Kit,Kit Toiletry Bag,Travel Bag Pouch

Shaoxing Gold Sun Textile Co., Ltd. , https://www.sx-goldsun.com