The use of daylighting covers is very extensive. Its very light transmission is only 3% lower than the material of BYK, while the anti-aging and anti-impact ability greatly exceeds the acrylic material's lighting cover, and the maximum load can reach 350KG. However, the current daylighting hood basically uses PC board as the substrate, but it is not mature enough. The following small series introduces the product features of the lighting mask and the cleaning of the PC lighting mask. Lighting mask product features 1, the light transmittance of the lighting cover: the light transmittance of the lighting cover can reach 85%, compared with glass. And in the UV coating plate sunlight exposure will not produce yellowing, atomization, poor light transmission, light transmission loss of only 8% after 10 years. 2, the lighting cover impact resistance: the impact strength is 300-400 times that of ordinary glass, is 35 times the thickness of the acrylic plate, is 3-30 times that of the tempered glass, with 1 kg below the 3kg hammer fall also no cracks, there is no The name of broken glass and Xianggang. 3, light-shielding light weight: and the glass is only half the weight of it, convenient transportation, but also reduces the installation and support frame costs. 4, the lighting mask flame retardant: PC board itself is 650 degrees Celsius ignition point, there is a good flame-retardant performance, spontaneous combustion will not appear toxic gases, will not contribute to the spread of fire. 5, in the outdoor temperature of 5 °C, the indoor temperature of 28 °C, in the room when the temperature is low, the surface of the material will not have condensation. PC lighting mask cleaning 1, can be washed with water below 60 °C 2, can use a soft cloth soaked in soapy water on the panel to clean the dust and dirt, prohibit the use of rough fiber fabrics or brushes and other contact surface, can not scrape with a scraper, razor or other sharp tools. 3, then rinse with water 4, if the board has grease, glue traces and so on. It can be scrubbed with absolute alcohol, kerosene or a soft petrol. 5. After cleaning, wipe with a soft cloth with cold water to prevent water spots. Editor's summary: The product features of the daylighting hood and the cleanliness of the PC's daylighting hood are introduced here. I hope to be helpful to everyone. If you want to know more about yourself, you can follow the information on this site. Lighting mask Let Street Light,Spot Lights Outdoor,Outdoor Garden Lighting,Waterproof Led Light JIANGMEN MICHEN LIGHTING CO.,LTD , https://www.jmmission.com