Seven materials quality needed for decoration

Many owners identify the decoration materials in a simple way: 1. Identifying from the brand, the quality of the brand name is certainly good; 2. Identifying from the price, the higher the price, the better the quality, which is actually wrong, because the brand name material There are also defective products, and high prices are just a conceptual hype. Below, we will introduce some of the most apt and practical ways to identify quality materials that are prone to wrong choices. We hope that we can help you to buy affordable decoration materials.

Decorate and decorate

A: The quality of water pipe identification.

1. The quality of aluminum-plastic tubes is better than that of pure PPR tubes of the same brand. In addition to being more durable than pure PPR tubes, aluminum-plastic tubes have the advantage that PPR tubes do not: PPR tubes are connected to fittings by hot melt. During construction, if the pipe is not carefully watched, the nozzle is easily overheated, the nozzle is wrapped, the pipe diameter is reduced, and the water flow is reduced. In the case of aluminum-plastic tubes, there is no such risk because there is a circle of aluminum alloy that is not easily melted and deformed.

2. Water pipes cannot have the function of antibacterial or bactericidal. Therefore, it is recommended not to buy water pipes of the concept of hype, such as nano antibacterial pipes.

Second: the quality of waterproof material identification.

1. Refusal to buy other type KII waterproof counterfeit Deco KII.

2. Identification of waterproof quality: The flexibility and strength of the waterproof layer. The waterproof layer with good quality waterproof material has better tensile performance after construction, and the quality will be broken when it is weak.

3. Regardless of the quality of waterproof material, waterproof layer will be aging failure, so do not rely too much on waterproof material, but should pay attention to how to ensure that the water pipe is not water seepage, and whether the gap between the tiles is not waterproof.

Three: latex paint.

1. Refused to purchase latex paint without Green Ten Ring Environmental Protection Sign.

2. Identification of latex paint quality: There is an opportunity to exert the content and scrub resistance of the material. The former indicator determines the degree of environmental protection of latex paint. The latter standard determines the durability of wall paint. I suggest that you can use Nippon or Dulux's net emulsion paint and hardcover five-in-one latex paint, they all have a common feature: good quality, inexpensive, is the brand-name products in the market to support the amount of products.

3. Do not buy high-priced latex paint that is conceptually hyped. For example, five-in-one anti-formaldehyde bamboo charcoal anti-formaldehyde, etc., gives latex paint some unique non-existent functions, selling latex paint as a health care product. The surface of the latex paint is water-resistant and the indoor air cannot enter the interior of the latex paint. Therefore, there is no effect that can remove the formaldehyde in the indoor air. It is purely the concept of latex paint.

Four: glue

1. Carpentry glue must use Green Ten Ring standard products.

2. Wall paint primer used glue do not buy bulk without manufacturers.

Five: Tiles

The quality of the identified tiles can be measured in terms of anti-fouling properties, flatness, and size error.

1. Use ceramic tiles with good dirt resistance.

Anti-fouling performance is mainly reflected in the polished tiles. The anti-fouling performance of antique tiles is generally not better.

Commonly used polished tiles are generally divided into two types: seepage tiles and polycrystalline fine-powder bricks. The simplest method of identification: from the side, the seepage tiles are single-layered, and the polycrystalline fine-powder bricks are generally on the basis of the seepage brick bricks, plus one more layer. We usually add this one layer as the protective layer. , so polycrystalline micro-powder bricks are generally double-layered. Since the seepage tile lacks a protective layer on the surface of the polycrystalline fine-powder brick, the anti-fouling performance cannot be achieved. As long as it is a polycrystalline fine-powder brick, no matter how poor its flatness and size error are, the anti-fouling performance is not much different.

2. Use tiles with good flatness and uniform size.

Before a tile was put into the kiln, it was marked with the brand on the back. After the tile was burned out, was it flat and the same size? Do not know in advance, must wait out of the kiln, after the factory grading, burned well, the size of a good flatness is good, is the superior product, and vice versa, is a defective product. What to do if defective? Break it? Impossible, have to sell, how to sell it? Special deal. As a result, we often see some famous tile tiles with a special bargain for Thanksgiving, special deal with defective bricks.

Of course, the sales young girl will never admit that there is something wrong with the quality of his own special bricks. They will make a variety of reasons to convince you that their special offers are sincere and sincere. Don’t believe them, just trust their own eyes: Let The brand salesman tells you at which site you are using this brick. You go to the construction site to see, and all the lies are not broken.

How do you see from the construction site whether the flatness and size of tiles are the same?

The first step: Look, see if there is uneven between the bricks, look at the size of the gap left by the brick. Everyone here will have questions: How can the size of the gap left from the tiles tell the quality of the tiles? No matter what color it is, floor tiles will be the same color in the future with the infiltration of stains: dirty dark gray. Nowadays, the home decoration is still more with light-colored bricks. The light-colored floor tiles do not look good with a circle of eye-catching black-gray crevices. Therefore, we hope that the gap between tiles will be as small as possible. To keep the gap small, there must be a prerequisite, that is, there is no problem with the flatness and size of the tiles. If there is a problem, in order to cover up, we have to widen the brick gap.

The finer quality polished bricks will generally have a gap of less than 1mm. The matt rustic tiles have a higher firing temperature than the polished tiles. The flatness cannot be compared with the polished tiles, but the antique bricks with good quality can also be used for cracks. Control at 1-1.5 mm. If it is a light-colored brick, but the gap is greater than this standard, we must doubt the quality of the tile is not a problem.

The second step: touch. The four corners of the tile are not flat, you can see the level of masonry craftsmanship; if the four corners are flat, the edges of the tile are uneven, indicating the quality of the tiles.

Building materials, greasy decoration, tricky tree, three trees, paint, toilet, latex paint, door prices, aluminum alloy, sofa bed, floor tiles, cabinets, door, counter, cabinet, door, glass, craft glass, home cabinet, cabinet, glass cabinet, door, glass, cabinet, door, cabinet, door, cabinet, door, mural, glass, cabinet, glass door, antique brick. Functional Sofa Premium Tile Tiles Price Tile Tile Tiles ld Tiles

Spring Washer

Spring Washer,wave spring washer,disc spring washer,helical spring washer

Jiangsu Minglu Stainless steel Co.,ltd , https://www.minglufastener.com