Steam trap working principle

Steam trap works:

1. The steam trap is installed between the steam heating device and the condensate return header. When driving, the bucket is at the bottom and the valve is fully open. After the condensate enters the trap, it flows to the bottom of the bucket, fills the valve body, and is completely immersed in the barrel. Then, the condensed water is discharged to the return header through the fully open valve.

2. The steam also enters the trap from the bottom of the barrel, occupying the top of the barrel and generating buoyancy. The barrel slowly rises and gradually moves the lever in the direction of the seat until the valve is completely closed. Air and carbon dioxide gas collect through the exhaust orifice of the barrel and collect at the top of the trap. The steam discharged from the vent hole will condense due to the heat dissipation of the trap.

3. When the incoming condensate begins to fill the barrel, the barrel begins to exert a pulling force on the lever. As the condensate level continues to rise, the resulting force continues to increase until the pressure differential can be overcome and the valve is opened.

4. The valve begins to open and the differential pressure acting on the flap will decrease. The barrel will drop rapidly and the valve will be fully open. The non-condensable gas accumulated on the top of the trap is discharged first, and then the condensed water is discharged. When the water flows out of the barrel, it drives the dirt out of the trap together. At the same time as the condensate discharges, the steam restarts into the trap and a new cycle begins.

Global hardware network

Concerned about surprises

Label: Steam trap working principle

Previous: Structural features of sewage pumping submersible pump Next: Teaching you how to identify alloy cable and traditional copper core

Touch Free Faucet

Bestware Touch Free Faucet brings the fine design and high technology together in all areas of the product process beyond Pull Out Faucet , Commercial Faucet and Commercial Kitchen Faucet. With extensive range of components, we can offer a large selection of both standard Pre-rinse Faucet and custom Basin Tap units as well as flexible combination. Stainless steel is 100% recyclable and is comprised of over 60% recycled material, Bestware faucets are the perfect solution in the commercial and industry for better water quality and the circumvention of the development of deleterious substances and bacteria. No plating, no oxidizing, no rust, lead free.

Touch Free Faucet,Pre Rinse Faucet,Pull Out Kitchen Faucet,Pull Out Tap

Bestware Hardware Production Co., Ltd. , https://www.bestwarefaucets.com