As we all know, corporate overhaul is the high incidence of accidents, and the biggest victims of accidents in major repairs are migrant workers. The author recently saw a chemical company participate in the overhaul and saw that the “three violations†of migrant workers' maintenance personnel can be seen everywhere. If a helmet is not worn in accordance with the regulations, the safety belt is not used for high-altitude operations, and the wrench is not used for high-level operations. Fire permits and so on. The author believes that strengthening the work of safety education for migrant workers is very necessary and cannot be ignored. Due to the short time and heavy task of equipment overhaul, many companies invited some migrant workers to participate in maintenance work during the overhaul period. The migrant workers' own conditions determine that their safety awareness is relatively weak, let alone have professional emergency rescue skills. Most companies ignore the need to provide security training for migrant workers. The safety education for migrant workers is in the form. In order to continuously improve the safety quality of migrant workers and ensure the safe and orderly conduct of overhaul work, companies should do three things: First, the employees of this company must take the lead. The formal employees of the company generally receive formal safety education. They have a strong sense of safety, a wide range of professional safety knowledge, and they can observe disciplines at the scene of major repairs. Therefore, enterprises should give full play to the exemplary role of formal employees, so that they can influence the migrant workers around them by their own actions and pass them the positive energy of safe operation. Second, safety education for migrant workers does not go through the court. When undertaking safety education for migrant workers, enterprises must target their specific maintenance projects and conduct appropriate safety education instead of simple general training so that they can truly learn safety knowledge and learn self-protection and emergency skills. For example, there is a chemical company that goes beyond the training to ask migrant workers what is the safety color, the electric arc will burn their eyes, and the poisonous and harmful environment should be worn with protective equipment. Again, we must increase safety supervision. Enterprises should integrate the safety management personnel of each workshop and office, and jointly picket, investigate and enforce strictly, and leave no effort to form a concerted effort. It is also necessary to go deep into the site, especially to go to some corners of maintenance, because the migrant workers who go to these places tend to be less strict with the operating procedures, which is a safety “dead pointâ€. At the same time, it will be responsible for the supervision of safety work, the specificization of assessment measures, so that the penalties to increase the intensity of the only comprehensive management in order to work with migrant workers to create a safe, harmonious and healthy production and work environment. Security is not everything in the enterprise, but without security there is no enterprise. The majority of petrochemical enterprises only continuously intensify safety education for migrant workers so that they can also observe and observe all disciplines, and supervise and administer them individually, so that they do not harm others and are not harmed by others, tighten the string of safety, and jointly build a safety protection embankment. In order to make the company lasting. This article is a reprint of online media. It only represents the author's point of view. It has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.
10W Mini Glue Gun Ptc Heating Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of
standards to ensure a robust and long life, we hope it provides you with many
years of trouble-free, safe and reliable service.
General Safety Information:
1. Check
if the plug cord was in good condition, and if there is stand before plug into
the electrical outlet ; Check if the used glue gun has glue flow through back
of the tunnel;
2. wait
5-10 minutes to allow glue to soften, stand up the glue gun on the table when
not in use;
3. Touch
nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop
the nozzle;
4. If the glue could not flow from the nozzle when
the glue gun start to work, check if the glue gun are heating;
If glue
gun can not be heated, there are following reasons:
If glue
gun can be heated, there are following reasons: Nozzle has been stopped by any
impurity, ask careerman to manage it.
5. Do not use the glue gun
under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle
or melted glue;
7. Do not remove out the melted glue stick from
the tunnel back side, it will damaged the glue gun as well as scalding person
hands.
8. Do not to disassemble or assemble any glue
gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it
beyond any of Children palpable side;
10. Only used for melting glue stick, no other
usage;
11. When in use, there are any glue flow back
from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use
after 15 minutes;
Important
Caution:
1．
Before use the glue gun, check
if the plug cord into electrical
outlet properly;
2． When glue gun
in first use, the heating element will have small smoke, it is normal
situation, but the smoke will disappeared after 10 minutes;
3． After power,
not for a long time in standby mode(not longer for 20 minutes), when the
suspension of use, unplug first.
4． Avoid to use
the glue gun under very hot or very cold environments.
5． Better not
work under direct cold wind blowing, it will reduce efficiency and loss power
6． When in
continuous using, do not press the trigger with great pressure, and try to
squeeze out the un-melted glue, it would damage the glue gun
7． Not
applicable for bonding heavy objects or objects needed strong adhesive
8． The quality
of glue stick will directly influence the glue gun function and sticking
objects quality;
9． If the
power cord is damaged, do not replace it by yourself, must ask for
professionals to replace it.
10． This tools must b e placed in its position when
not in use. And storage before the tools complete cooled.
11． Be careful when using any other electrical appliance
with flammable material.
12． Not applicable for a long time in the same
place.
13． Do not use an explosive gas atmospheres.
14． Note that heat may be the line of sigh, combustible
materials.
15． Do not leave equipment unattended when switched
on.
16． This appliance is not intended for use by
persons(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
17. Children should be supervised to ensure that
they do not play with the appliance.
Using methods
1. Glue gun
using voltage is 110-220V AC,50/60Hz;
2. Tip gun
forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm
(mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks
through
4. After power,
wait for 5-10 minutes to allow glue to soften
Mini Glue Gun 10W Mini Glue Gun, Mini Glue Gun, Small Glue Gun, Electric Glue Gun Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com
1
Plug cord into electrical outlet not
properly;
2
Glue gun has been destroyed owing to
inner cord short circuit;
tunnel at back of gun