Whether the sludge dewatering treatment is thorough, most of them depends on the moisture content of the treated sludge, and the moisture content of the sludge cake is high and low, which also reflects the sludge dewatering performance of the filter press. Then how to judge the degree of sludge drying in the filter press? Zhengzhou Dingsheng, a filter press manufacturer, can intuitively determine the dryness and wetness of the sludge after treatment by the filter press. 1. Direct observation. Generally, the sludge having a high moisture content after being treated by the filter press has a large viscosity and is not easy to form a mud cake, and if the moisture content after treatment is low, the viscosity is small and a mud cake is formed. Therefore, when the filter press performs sludge treatment, observe the operation of the filter press and the situation of the mud cake. If the treated sludge forms a mass, it does not become a mud cake, and the filter in the filter press Adhesion on the plate and the filter cloth indicates that the sludge treated by the filter press is not dry enough and still has a high water content. If the filter press processes the sludge and produces a piece of mud cake, and there is no mud adhesion on the filter cloth filter plate of the sludge filter press, the sludge after the filter press treatment is still relatively dry. The moisture content is also relatively low. 2. Direct measurement method. Using the sludge moisture content tester to carry out the humidity test on the mud cake produced by the filter press, the water content of the sludge can be directly obtained. Nowadays, large and medium-sized sludge treatment projects are equipped with water content testers, including Zhengzhou Dingsheng, a filter press manufacturer. In order to allow customers to accurately understand the sludge dewatering degree of Zhengzhou Dingsheng sludge filter press before purchase, it is also very accurate. Professional moisture meter tester. In the stage of purchasing the sludge filter press, it is necessary to have an accurate understanding of the degree of dryness and wetness of the sludge after the filter press treatment, and to select a filter press with a low water content and a significant reduction in sludge after sludge treatment. After purchasing the sludge filter press, it is necessary to constantly evaluate and measure the moisture content of the mud cake, and to know whether the operation of the sludge filter press is good or not, and whether it meets the standard. It is hoped that the two methods of judging by the filter press manufacturer Zhengzhou Dingsheng will be useful to everyone in judging the degree of sludge drying after treatment. Concerned about surprises Label: Filter press manufacturers teach you to judge the degree of wet and dry after sludge treatment Previous: Introduction to Filter Cartridges Next: Which type of cone-breaking parts is the most cost-effective? Anti-collision buckets are mainly located on highways and urban roads where cars and fixed facilities in the road are likely to collide, such as: road turns, road entrances, toll stations, and entrances and exits of elevated roads, parking lots, communities, gardens, Gas stations, etc. play an isolation role. The anti-collision barrel is made of high-elasticity and high-strength modified plastic. When the car collides with the equipment, it can effectively reduce the impact force. Therefore, it can significantly reduce the car. With human damage. A reflective film is affixed on the surface, and an instruction label can be attached as required. Anti-collision Bucket Water Filled Anti-Collision Bucket,Anti-Collision Bucket Reflective Barrier,Anti-Collision Bucket Road Safety Barrel,Road Safety Barrier Barrel Jieyang Xinxin Industry and Trade Co., Ltd. , https://www.gdxxgm.com
material ingredient
The plastic anti-collision barrel is made of plastic with good elasticity, high strength and strong performance. The plastic anti-collision barrel has a yellow body, and the surface will be covered with an advanced reflective film. When the light shines on it, it can achieve a reflective effect. clear and distinct.
special function
The plastic Anti-collision Bucket can be filled with water or yellow sand. After being filled with water or yellow sand, it will have the ability to cushion the impact. The plastic anti-collision bucket has a good effect on the traffic impact when it is filled with water or yellow sand. , But when you do n`t need it, you can easily and flexibly remove the water and yellow sand.
Functional principle
The reflective film on the surface of the plastic anti-collision barrel is clearly visible during the day and night, which can play a role of warning anti-collision. The accidental collision of the vehicle can play a buffering role, minimize the damage to the vehicle, and greatly reduce the loss of the accident.
FRP crash bucket
Light weight and high strength, strong anti-corrosion and weather resistance, resistance to thawing and moisture (water), strong overall disposable, good decoration. Its biggest feature is its low recycling value and it is not easy to be stolen.
1. Anti-collision bucket is filled with sand or water, with buffering elasticity, which can effectively absorb strong impact force and reduce the level of traffic accidents; combined use, the overall bearing capacity is stronger and more stable
2. Material is engineering grade plastic or FRP, and reflective film is engineering grade reflective film
3. Bright colors, large volume, clear and clear directions
4. Quick and easy installation and movement, no machinery, saving cost, no damage to the road
5. Can be adjusted with the curve of the road, flexible and convenient
6. Suitable for use on any road, fork, toll station, etc.