Tile purchase and construction questions and answers (2)

Cracks in vitrified tiles, can not be repaired by what? Another paint off the brick, how to remove the traces?
The crack is no way to repair, or is to remove the cracked brick resurrection, in addition to no other way, paint the problem you can use toothpaste or Amway tile cleaner try it!

How to choose bathroom tiles? Turned in the market, but do not understand, too many varieties, do not know the difference, it seems there are two kinds of glazed tiles and glass transition, what is the difference? What are the advantages and disadvantages? What are the advantages and disadvantages of matt and light? What kind of kitchen shop is suitable?
About how to buy tiles you can look at my signature article.
At present, the bricks used mainly in bathrooms are glazed tiles, which are divided into light and matt.
Light: The surface has a good reflective effect and it feels bright!
Matte: Light is launched in all directions! The light feels soft! Not dazzling! Generally used in the bathroom more!
Vitrified bricks are used for home decoration in the living room dining room. They can also be used in bathroom walls.
The kitchen generally selects the bright glazed tiles, looks clean, tidy and clean

I just want to make the gap in the floor tiles small. Because of the long time, if the tile gap is big and dirty, it is hard to see. Can anyone help me with suggestions?
Tiles should not be tiled as seamlessly as possible. This is not to say that the size of the tiles is a problem. The main reason is that the tiles will have hot and cold shrinkage and the seams will be too small, which will reduce the service life of the tiles. The normal seams of the tiles are 1- 3mm.
1, any brand of tiles in the size, edge straightness will have errors, it is impossible to completely do so in the brick there is no size error.
2, the most important thing is to consider the service life of the tiles, because any object will have hot and cold shrinkage, the seam is too small, the brick will be broken. Just like the railroad tracks of railways, they will leave gaps at intervals.

Is the brick better than Guangdong?
Relatively speaking, the production line in Guangdong is more advanced and the quality is better

When will the trench paste be applied?
Gutters are generally available 24 hours after the tile is laid. It is not advisable to make joints prematurely, so as not to loosen the newly laid tiles, and it is easy to fall off in the future.

How much seam does the seamless brick leave?
Seamless seams are generally available with 1-1.5mm seams and no less than 1mm. Special effects may depend on the situation.

I bought a dual-use tile for the wall and floor. I wonder if everyone thinks that there will be problems when it is laid on the floor.
Is it a glazed tile or a glass tile? There is no problem with vitrified tiles. Glazed tiles are a bit overhanging. In general, glazed tiles are used primarily as kitchen tiles. There are differences between the use of walls and the ground. The density of floor tiles is larger than that of wall tiles. Water absorption is lower than the wall surface. Glazed wall tiles cannot be used as floor tiles, and floor tiles can be used as wall tiles.

Please be sure that the floor tiles of our house are actually in the kitchen. Will the oil produced by cooking be affected by the tiles?
The general situation is no effect, that is, pay more attention to cleaning on it.

Ultrafine powder and anti-ultra-fine floor tiles how to distinguish?
Ultrafine powders are used to grind the powders made into the body to be smaller and finer and then made of high temperature and high pressure. Usually the fineness of the powder reaches more than 200 mesh. Now, ultrafine powders produced by general manufacturers only use micropowder cloths about 2 mm above the surface of the bricks. The ultra-fine powdered vitrified tiles that penetrate into the market are few in the market, and there is no need to seep through to the end. Because the surface part of the home for several decades will not be worn out.
It is actually very simple to identify true and false micro powders:
(1) The product of ultrafine powder is a delicate and natural pattern of brick surface, and each pattern is different. But the overall feeling is more coordinated.
(2) The product of imitation superfine powder is the same as the brick pattern.
According to this method, you can quickly identify the tiles of genuine and fake ultrafine powder products.

Tile Floor Tiles Home Improvement Renovation Living Room Floor Tiles Kitchen Wall Tiles Bathroom Wall Tiles Bathroom Tiles Bathroom Tiles Whole Bathroom Bathroom Size Kitchen Tiles