Roll Up Door Servo Motor,Automatic Roller Shutter Door Opener,Roller Shutter Door Servo System,Glass Sliding Door Motor Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfhighspeeddoor.com
1. Prepare a roll of 6cm wide transparent tape and some thicker printing paper. You can cut the old calendar into 16-size (18.4cm × 26cm) paper for future use. Stick the transparent tape longitudinally on the prepared printing paper. When pasting, first stick the tape head on the desktop, which must be at least 5cm, pull out a piece of tape of appropriate length, hold the tape roll in the right hand to keep the tape straight, place the printing paper under the pulled tape, adjust the position, and let the tape Keep a certain distance from the edge of the paper, just handle it as 2cm. Use your left hand to slowly press down from left to right to make the tape stick to the paper, and at the same time slowly pull out the tape with your right hand, so that it can be easily attached, and then cut off the extra tape. Generally, 16-inch paper can be laid with two 6cm wide transparent tapes in parallel in the longitudinal direction. Of course, a certain distance should also be maintained between the two tapes.
2. Open WPS Office, first draw a rectangle with the rectangle tool, right-click to set the object properties, set the left margin 2cm according to the position of the transparent glue pasted on the printing paper, the width is 6cm of the transparent glue width, and the height is slightly higher than the page height Small, this rectangle is mainly used for positioning. Insert a single line of text or text box to enter the desired label text, set the border font, and then insert some simple graphics to combine. Then copy n copies of the designed label (n is counted by the number of labels that can be arranged) and arrange them in the rectangle just drawn. Make sure not to exceed the range of the rectangle to print on the transparent tape. Put in the paper that was pasted with transparent plastic just to print, pay attention to print on the side with transparent tape. Handle the printed paper carefully, don't fold it or wipe it. The printed characters are now easily erased.
3. Put a layer of transparent glue on top of the printed label. This layer should be staggered from the next layer of transparent glue to tear it off in the future. Carefully paste according to the method described in step 1, if you make a mistake, you can give up your efforts. Finally, cut the excess paper along the two sides of the first layer of tape longitudinally, and then cut the labels one by one horizontally. These are the transparent labels we need.
As long as the upper layer of transparent adhesive is torn off during use, the originally printed label text will be glued, and then you will see where you want to paste it. Because the text is certainly waterproof under the tape, and it can never be scraped off, which is super wear-resistant.
Here we use 6cm wide transparent tape, so the maximum label that can be printed is 6cm × 100cm (100cm is the limit of WPS Office). This is a size that is difficult for general label printing equipment to achieve. Of course, you can make bigger labels if you have enough transparent tape. If you insert your own photos when designing labels, you can also easily create transparent photo stickers.
Tips for printing transparent labels with a printer
When it comes to printers, we usually use it to print some files and pictures. In fact, as long as we use our brains in application, things like making transparent labels, glass signs, and large-scale promotion of slogans are not difficult to do. These things are usually necessary. Professional equipment can do it. See how I used transparent tape everywhere to easily print out waterproof and wear-resistant transparent labels. The effect can even be compared with professional equipment printing, and the cost can be much lower. Of course, at least you must have a laser printer. Inkjet printers are absolutely not good.