As a result of tailor-made, the overall wardrobe has become a consumer choice for more and more families. But how to maintain and clean this expensive big guy has become a worry for many people. Let's share with you the knowledge of the maintenance and cleaning of the whole wardrobe. The length of the overall wardrobe life depends on its own quality on the one hand, and the daily maintenance and cleaning of the user on the other hand. After many users purchase and install the whole wardrobe, they are not well maintained. The service life of the whole wardrobe will not last long. So how should we carry out good maintenance and cleaning to extend its service life? The overall wardrobe is generally composed of cabinets, door panels and hardware. For the maintenance and repair of these three parts, let's take a look at each part of the cleaning and maintenance tips. 1. Clean and maintenance of the cabinet The cabinet is made of sheet metal, which is the main component of the whole wardrobe. Its quality directly determines the service life of the wardrobe. The panels of the overall wardrobe on the market are mainly wood-based panels, and the solid wood panels are used less because of their high price. The cabinet occupies most of the size of the wardrobe. Every day, keep the surface clean. When there is dust, use a donkey or a soft cloth to remove dust. 2, the door panel cleaning and maintenance The material of the wardrobe door panel is often more diverse than the material of the cabinet, and the door panel of different materials also has a great influence on the price of the whole wardrobe. The wardrobe door panel cleaning is not the same. For different materials, choose the appropriate cleaning tools and cleaning methods according to their different characteristics. 3, the cleaning and maintenance of hardware accessories The hardware accessories of the wardrobe include handles, locks, hinges, etc. They are small in size but important in function. The cleaning and maintenance of these hardware accessories is indispensable. The hardware accessories should be gently wiped with a dry soft cloth. Do not use chemical cleaners or acidic liquids. Otherwise, the hardware will be corroded. 4, other cleaning and maintenance considerations The bottom rail is easy to accumulate floating dust, which will affect the sliding of the bottom wheel, thus affecting the service life of the sliding door. Therefore, it is necessary to pay attention to the frequent use of the vacuum cleaner to remove the bottom rail floating dust. Use a rag to clean the corners, and pay attention to dry with a lint-free cotton cloth. 5, do a good job of long-term wardrobe protection Place a small bag of dry lime or other desiccant in the corner of the closet, place camphor and tobacco leaves in the closet to prevent mites and mites; put some pepper and prevent rats. The maintenance of the whole wardrobe should not be just a daily cleaning care, but should also include careful care during use. Especially when using the current high-end smart wardrobe, you should follow the product operation manual. The following are the things you should pay attention to when using the whole wardrobe. 1. Do not press heavy objects on the top of the wardrobe. Many of the overall wardrobes are the same height as the walls, leaving no space at the top. But there are some that have some space on the top of the closet and the top of the room, and many people are used to stacking some less commonly used objects into this space, which is actually very bad for the wardrobe, especially when the stacked objects are heavy. . Therefore, do not press heavy objects on the whole wardrobe, so as to prevent the door from protruding, the door is not tight, and the plate is deformed. 2, clothing, etc. Do not stack too much Clothing should be stacked neatly, avoid stacking too much, should not exceed the cabinet door to prevent deformation of the cabinet door. At the same time, the wardrobe should not be used beyond the capacity of the wardrobe. The cabinet of the wardrobe has a certain load-bearing limit. Do not overload the load. 3, push and pull action should be gentle When using the wardrobe, when pushing and pulling the cabinet door and the drawer, the push-pull action is gentle to prevent violent violent impact. Pay special attention to the direction of the rotation of the handle and avoid the dead force. Pay special attention to children, do not hang on the door handle and sway, which is easy to cause danger and may cause damage to the door. 4. Regularly check the connectors Before use, check the connecting parts of the wardrobe regularly and find that the looseness is tightened in time. If the disassembly or assembly is caused by disassembly or assembly, the relevant brand store should be notified in time to assist in handling. Do not disassemble it. 5. Check if the handle is protruding before using the sliding door. When using the sliding door, be sure to check whether the handle is protruding. If there is a protrusion, press it first, otherwise it will damage the side cabinet or handle. 6, other use precautions When using the sliding door for a long time, the dust-proof strip may have a slight glue drop and can be bonded with double-sided tape. It is normal for the light rail door pulley to be used for a long time. To ensure the smooth and quiet sound of the pulley, please add some lubricating oil along the upper and lower pulleys every 2-3 months. Always apply wax or paraffin on drawers, sliding door edges and bottom slides. In summer, the humidity of the air is large, and the solid wood drawers and sliding doors of the wooden wardrobe may be difficult to open and close due to excessive expansion. In this case, wax or paraffin can be applied to the drawer, the edge of the sliding door and the bottom slide. The long life of the overall wardrobe is inseparable from the user's careful protection. If the user does not pay attention to the protection after purchasing the whole wardrobe, the wardrobe will be unnecessarily damaged, and the life of the whole wardrobe will not last long. Let's take a look at the use of the overall wardrobe taboo, the point of protection that requires great attention. 1, avoid direct sunlight Many people think that the wardrobe will be moldy in the dark, so it is often placed in the place where the sun can shine. This is a very serious misunderstanding, because the sun will cause great damage to the wardrobe. Especially in summer, if the sun shines directly on the whole wardrobe, it will accelerate the thermal expansion and contraction of the wood, causing the wood to crack and crack, and at the same time, it will cause the paint to crack. Therefore, the whole wardrobe should be placed away from direct sunlight, and if necessary, the curtains can be used to block the sunlight. 2, away from the air conditioning tuyere In order to extend the service life of the overall wardrobe, it is recommended to keep away from the air conditioning tuyere when placing it to avoid premature aging and damage to the wardrobe due to large temperature difference changes. 3, to prevent excessive humidity The overall wardrobe should be well ventilated and ventilated to avoid direct sunlight and excessive humidity. When placed in a damp and cold location, the wardrobe and the clothing placed in it will be moldy, and the hinges on the closet, sliding to the Spring metal parts will rust. Therefore, when the living room is too humid, it is necessary to periodically open the doors and windows to ventilate, and place a small bag of dry lime or other desiccant in the corner of the closet. 4. Keep away from heat and corrosive substances Do not place overheated or cold things on the overall wardrobe, keep away from open flames, and do not expose the surface of the wardrobe to corrosive substances such as alcohol, banana water, gasoline, nail polish, strong acids, alkalis, etc. These will cause damage to the overall wardrobe that is difficult to repair. 5, to avoid bumps and prevent damage When installing and moving, avoid bumping and scratching the cabinet and door panel; avoid placing sharp or rough objects directly on the surface of the wardrobe, which may cause scratches on the surface of the wardrobe; prevent heavy objects and sharp bumps The track prevents an abnormality inside the track and affects the sliding effect.
Recoil Springs,Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring
Professional Recoil Springs manufacturer is located in China, including Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring, etc.
We are factory, we had made these products 15 years, we can give you good serve and quality. Hope to business with you!
Recoil Springs,Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring Shenzhen Lanejoy Technology Co.,LTD , https://www.ccls-vaccine.com Part1: A new look for the whole wardrobe maintenance cleaning tips
Part2: Invulnerable overall wardrobe use precautions
Part3: Avoid the misunderstanding of the overall protection of the overall wardrobe
