Aluminum alloy glass partitions are now being used more and more widely, the main role is to use aluminum alloy clip glass as a partition to divide office space, a reasonable use of space, to meet office use. The best use of the partition is to perfectly distinguish the office space. The office partitions are usually made of aluminum alloy glass partitions . The perfect office space design elements are like partitions and non-separation, making the office seem to be in disorder. What is aluminum alloy glass partition Aluminum alloy glass partition, as its name implies: The glass partition wall with aluminum alloy frame is also called glass partition. The main function is to use aluminum alloy clip glass as a partition to divide the office space according to the needs, and to make more reasonable use of space to meet the office use. The aluminum alloy glass partition wall is usually made of tempered glass, which has the advantages of wind pressure resistance, cold and heat resistance, impact resistance, etc. Therefore, it is safer, firmer and more durable, and the damage to the human body after the glass is shattered is much smaller than ordinary glass. There are two types of materials: single and double layers. Partitioning works should be good lighting, sound insulation and fire protection, and environmental protection. Aluminum alloy glass partition is also called office high partition, office high compartment, office high partition, partition, finished partition, aluminum alloy partition, high screen, glass partition, office partition, office partition and so on. Some people even called screens. The glass partition is a type of ceiling that completely divides the space. Professional high partitions can not only achieve the traditional function of space separation, but also have obvious advantages over traditional partitions in lighting, sound insulation, fire protection, environmental protection, easy installation, reusable partition glass partitions, and mass production. wall. Aluminum alloy glass partition advantages 1. It can be partially dismantled and reused repeatedly. Some of the compartment system materials will not bring waste to the environment. It is a kind of green building materials and has a long service life. From a long-term perspective, installation of glass partition system material is more convenient than installation. Other forms of partition material are cheaper and more cost-effective. 2. During use, the positions of doors, windows, physical modules, and glass partitions can be exchanged at any time, and can be reassembled and reused. After the materials are disassembled and assembled, their damage is minimal, and the expenses incurred by the frequent relocation of offices can be greatly reduced. 3, aluminum alloy glass partition internal structure can be easily cable laying. Without wall-embedding, the maintenance and replacement of cables is more convenient, and separation of strong and weak electricity is possible. The cable trough can act as a shield for signal lines. 4, aluminum alloy glass partition installation faster than ordinary partition. 5, aluminum alloy glass partition fireproof and fireproof, compartment system is composed of metal structure, glass, aluminum alloy and other materials also have fire resistance, the internal structure of the compartment system is steel structure when the fire resistance limit is 30MIN, 60MIN or longer time. 6, aluminum alloy glass partition pollution-free odor emissions, can be used immediately after installation. 7. The inside of the aluminum alloy glass partition door frame is pre-installed with a sealing strip, which improves the sound insulation effect and the sealing performance. More can be installed at the bottom of the seal, so that the sound insulation system is complete. 8, aluminum alloy glass partition high quality imported blinds can be installed inside the two glass, not easy to dirty, no cleaning. 9, aluminum alloy glass partition sound insulation effect is good, partition wall has a very good sound insulation effect. Aluminum alloy glass breaks considerations The usual use area of ​​aluminum alloy partition wall products can be considered as follows: 1. Meeting rooms, negotiation rooms, design studios and similar areas Optional tape type, double-sided tempered glass composition 5mm +5mm. Because of the high sound insulation coefficient of this combination, it meets the quiet and interference-free requirements of the above venues. The crosspiece design can reflect the atmosphere, the steady effect. 2. Chairman, general manager's office and similar areas The type of built-in blinds can be selected. The double-sided tempered glass composition is 5mm+5mm. Mainly consider the sound insulation effect considerations, in line with the privacy requirements of the above venues. Built-in blinds increase the function of communication with the external environment, more affinity. 3. Large office area and similar areas The spacious and bright work environment reflects the modern atmosphere and management style. The mutual exchanges between employees will also greatly improve their work efficiency and satisfaction. Therefore, the type of single-sided glass edge and double-sided glass can be selected. 4. Large exhibition hall and other areas. Display and sales are more and more closely linked. Because the staff must not only understand the situation in the exhibition hall and communicate with multiple customers in time, but also need to negotiate privately with individual customers. Therefore, the selection of no rung type is suitable. Editor's summary: The relevant information on what is the aluminum alloy glass partition is introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible. Glass partition
The characteristics of the single-lever faucet are simple and easy to use, and the controllability is relatively strong, which is very popular with the majority of consumers; The double-handled faucet can bring users a more delicate water temperature feeling, and many friends who are more sensitive to temperature especially like this style of faucet; The faucet with a 90-degree switch can change the hot and cold water mode by itself, which is also a style that many consumers like now.
Shower faucet: It is installed above the shower room and is used to open hot and cold mixed water. The valve body is also mostly made of brass, and the appearance is chrome plated, gold plated, etc. The ways to open and close the water flow include screw lifting type, ceramic valve core type, etc. Shower faucets are available in hose showers and flush showers: thermostatic faucets with special functions, faucets with filter devices and faucets with pull-out hoses, etc., all of which have different requirements for installation. Single Handle Shower Mixer,Single Handle Shower Mixer Faucet,Single Handle Shower Faucet,Single Handle Shower Mixer Taps WENZHOU CHENKAI SANITARY WARE CO.,LTD , https://www.cnchenkai.com
