What you must know to use explosion-proof emergency lights

Proof emergency lights are in a closed state is flat. Explosion-proof emergency lights mainly have a certain automatic emergency function, there is a long emergency time. Don't worry about stopping work without electricity. It adopts a new type of LED light source, so that its power is reduced, its service life is prolonged, and its energy efficiency is high. Its internal structure design is more optimized and reasonable, has a higher electrical efficiency, so as to achieve higher reliability and energy-saving, in addition, this explosion-proof emergency light in the appearance of a relatively lightweight alloy shell, waterproof resistance Impact, avoiding some insecure factors. Its surface is made using the latest methods. It has strong corrosion resistance, and even if it works in very bad weather, it will not cause sudden changes.

However, when using it, you should pay attention to some common-sense knowledge:

1. In the process of transportation, the lamps should be installed in the configured carton, and some foam should be filled to reduce the loss of light bulbs caused by the shock.

2. In the installation of explosion-proof emergency lights, the lamps should be installed at the exit or on the emergency track, which will have better results in emergencies.

3. When using this type of lamp, the surface temperature of the lamp will increase, which belongs to some common safety phenomena. However, do not touch the center of the lamp with your hand, because its center temperature is higher than the outside temperature. Many, so as not to be burned.

4.. When repairing explosion-proof emergency lights, be sure to cut off the power to prevent accidents.

Hydrochloric Acid

Shijiazhuang Xinlongwei Chemical Co., Ltd. , https://www.xinlongwei-chem.com