Alarm system installation skills and prevention systems in daily life

Several intelligent buildings that extend intelligent building technology into an area are managed in an integrated manner and then connected together hierarchically for unified management. Such an area is called an intelligent community. That is, a centralized control and modular structure design approach is adopted. The management of all subsystems is centralized in the integrated control center. The managers of the integrated control center can inquire and confirm the safety status and three-table status of households within the community. Smart community is another hot trend after intelligent buildings.

Current status of smart communities The basic configuration of the current smart residential community application system mainly includes the following aspects:

● Information and Communication System: Provides voice communication, video broadcasting, and broadband information services.

● Security System:

a) The perimeter of the cell is alarmed, and infrared, microwave and other devices are set up. The center can display the alarm road sections and alarm time.

b) camera surveillance, set up a corresponding detector or camera at the key location of the cell, monitor relevant information and transmit images and record and store. Video intercom.

c) The residential houses have functions such as gas leak alarm, door magnetism, infrared, glass breakage, leak detection, and emergency help.

d) Set up a cable broadcasting system in outdoor public places in the community.

e) Management and billing of incoming and outgoing vehicles through smart cards or other forms.

● Construction equipment monitoring system:

a) The monitoring of the water supply and drainage monitoring system shows the relevant operating status.

b) The fault condition of the elevator's working status and the location of the floor are monitored.

c) Monitoring of lighting equipment.

●Property Management System:

a) Configure practical computer property management software to realize the computerization of residential property management and establish a community management information system.

b) Realize remote meter reading function.

c) Each system implements information connectivity and unified management.

Of course, in the actual construction process, other functions can be added according to the needs of the market.

However, there are still many problems in the construction of smart communities. In order to realize centralized monitoring, the general community sets up a central station with a computer as the core in the central control room, and the substation takes the microprocessor as the core to form a distributed distributed computer system. The substation microprocessors are mainly MCUs such as 486 and 586, and they have imported dcs modules. Either the product is not advanced or the cost is high. This makes the intelligent community management system less stable, reliable, and advanced. At the same time, because the intelligent community project construction is carried out in phases, this also makes the scalability of the system capacity not strong.

There are also some intelligent community control systems divided by function. Each subsystem is vertically divided and cannot share information, and equipment is repeatedly invested.

The solution to these problems can be considered from the following perspectives:

Taking into account the advanced nature of the equipment and technology, smart community system uses lonworks bus technology, so that the entire community network to achieve advanced.

The lonworks control network includes smart modules that are connected by one or more communication channels, ie, smart nodes, and the nodes communicate via the lontalk protocol. Intelligent modules can be programmed to send information and respond to external commands. Because the intelligent module has the characteristics of low cost and good compatibility, taking into account the actual conditions of the intelligent community project construction in phases, it is very beneficial to the scalability of system expansion.

The intelligent residential control system of the current LNS architecture is entirely because LNS multi-server technology can bring many benefits to network users: greatly reducing development time and costs; simple system integration; unlimited access to data, etc. This is why the demo system described in this article uses the LNS architecture.

The future of smart communities The development of smart communities in the future has two main aspects:

The first is "people-oriented" thinking. In the future, community construction will gradually deepen into the construction of an intelligent home. For example, the residents of the community can realize "e-currency" transactions or online shopping, medical diagnosis on the Internet, visit virtual museums and libraries, and on-demand vod home theaters; even community residents or intelligent community management and control centers can apply to residents of their communities. Air-conditioning equipment and home appliances are remotely controlled, allowing you to check and confirm the security conditions in your home, anywhere, anytime. In short, the design of the smart community in the future will adhere to the idea of ​​humanized system design, provide residents with warm, comfortable, convenient and economical services to the utmost, and always think about the residents.

Second, the "energy saving" idea. Environmental protection is an important theme in the 21st century, so the future construction of the community will take more consideration of environmental issues. Mainly reflected in the residential residential energy supply, in line with the principle of energy conservation, so that community facilities in the service part of the same time, so that residential residents, community facilities, community environment, a high degree of unity, harmony and integration.

There are more than 400 households in Ruiyuan Township. In order to realize the functions of calling, intercom, surveillance, unlock (fingerprint and key), networking, and security alarm, the entire community is equipped with a management center (sd-980m2), and the management center is interconnected with the management computer. The entire building is managed centrally and uniformly, and a luxury fingerprint access control host (fg-980 fingerprint access control) is installed at the entrance of the unit in each building, enabling fingerprint unlocking.

Customer-side installed multi-purpose visual extension (sd-980ry12s), which is connected to an infrared detector, gas leak detector, emergency button and door magnetic switch, respectively, when the indoor alarm detector is triggered, the management center of the security center The machine will display the security alarm room number and the type of alarm. At the same time, it will manage the alarm locations and types of alarms displayed on the computer as well as the processing results. The security guard can also communicate with each household through the management center, and can monitor the situation of the gate and can receive the user's alarm room number and distinguish the different alarm conditions. The user can observe the situation of the visitor and the door through the monitor screen of the ccd camera and the indoor extension installed in the entrance host, and can unlock the door for the visitor indoors. The host and the management center can conduct multi-faceted calls, and the user can also use the management center. Transfer calls to each other, you can also call the security guard through the call key to achieve the alarm, can play a positive role in protecting the owner's life and property.

For each household, a fl100-b multi-point fingerprint security door is added. Each fingerprint door can hold 100 fingerprints, and has three door opening methods: fingerprint, password, and tm card. It can adapt to all groups of people and facilitate the use of owners to meet the needs of high-end personnel.

The system composition and function of Wendatong fg-980 system This system is composed of management center, outdoor host, indoor extension, multi-way protector, power supply, electric control lock, door closer, alarm probe, etc., which can realize the two parties' call and building. Intercom, image surveillance, unlock the door, and other functions; and can achieve computer networking, to achieve the purpose of intelligent property management.

(i) Management Center (sd-980m2)

1. Through sd-980bm, all cell systems in the cell can be connected to sd-980m2 for comprehensive management. Bus system transmission and wiring.

2, the maximum capacity: you can connect 999 units system (ie, 999 unit door host).

3. It can call and talk with any extension or host in the cell.

4. You can use the call mode to monitor any host image.

5, 7 bit code operation, display.

6, can transfer the call between the household (extend), call.

7. Multiple management centers can be networked in the same community, and management centers can be leveled or graded.

8. The management center can call, talk and monitor each other.

9, there is a multi-function anti-theft alarm extension sd-980ry12s sent infrared, magnetic, smoke, gas alarm instructions.

10, can connect computers, printers, security information management.

11, for any community building structure networking requirements.

(II) Deluxe Fingerprint Digital Host (fg-9800)

1, digital signal transmission, bus system wiring, easy installation and debugging.

2, lcd display, its maximum capacity can connect 9999 user machines.

3, microcomputer control, intelligent operation, Chinese operation tips.

4, directly call the extension or management center to achieve two-way intercom.

5, infrared ccd camera and night light fill led to clear display images at night.

6, anti-damage alarm design, when someone illegally dismantle or destroy the host, the host will issue an alarm sound.

7. The user can directly press the fingerprint to open the door electric lock at the door of the host.

8, has a powerful operating menu, and management functions, able to record 60,000 entry records, can be directly on the access control host query.

9, with three levels of authority for the administrator, the head of household administrators and general users, each user can assign 10 fingerprints and a password.

(III) Multifunctional Video Intercom Indoor Extension (sd-980ry12s)

1. The guest calls the extension on the unit door host. The extension has a double-tone “click” sound and displays the visitor's image at the same time. The owner can pick up the handset to talk to the visitor.

2. After confirming the visitor, press the “unlock” key to open the unit door electric lock.

3, the owner can press the "monitor" button to monitor the unit door.

4, can be connected to the door in front of the household, the visitor presses the "call" button in front of the door, the extension has a double "click" sound, while displaying the visitor image, the owner can pick up the handset to talk with the visitor, after identifying the guest , You can press the "unlock" key to open the electric lock of the household door.

5, a household can install more than one extension, one of the extensions picked up the handset, press the "call" button, the remaining extensions issued a "click" sound, pick up the handset can be achieved after the intercom.

6. The extension can press the “call” button to call the management center and can intercom with it. If the management center is connected to the ccd, the extension can display the images from the management center.

7, the management center can also call the extension, the extension has a two-tone "click" sound prompts, pick up the handset can talk to it, such as the management center connected ccd, the extension can display the image from the management center.

8, can receive four-way detectors: infrared, magnetic door, smoke, gas. Conduct safety precautions.

9. Use the electronic lock and button on the extension to perform alarm setting (arming) and alarm release (disarming) operations.

10. The alarm setting time is 5 minutes and the alarm release time is 30 seconds (that is, there is a delay function for the entrance and exit. The exit delay is 5 minutes and the entrance delay is 30 seconds).

11. After the detector alarms, the alarm signal will be sent to the extension first. If not, it will be sent to the management center after 30 seconds.

12, smoke, gas alarm sound and light prompts.

13. This extension will visually integrate building intercom and theft prevention, disaster prevention, and alarm integration. It has complete functions, reliable performance, and easy system installation and wiring.

(D) Power Supply (sd-p18v)

Input power ac220v/50hz, output voltage dc-18v, output power 30w, power supply can be used for 8 extensions or an outdoor host, integrated power supply can be 24 hours after power failure.

(v) Multiple protection devices (sd-980p4)

1. It can isolate and protect the system bus when the extension system lines are short-circuited to each other, so as not to affect the normal operation of the system.

2. When the extension system line and the power line are short-circuited, it can be isolated from the system bus and power supply, so as not to affect the normal operation of the system, and it will not burn the power supply or other equipment.

3, fault indication function when there is a short circuit.

4, for a four-input system, a sd-980p4 can take 4 branches, each branch can be connected to 3 extensions (recommended customers: 1 branch only 1 extension, in order to effectively protect each extension) .

5, there is a video amplifier function.

6, there is a floor junction box function.

7, can make the system wiring specification, the system is protected, so that the installation, commissioning and maintenance is simple.

Intelligent anti-theft alarm system (6) Shuangjian infrared detector (cr-srdt15)

Technical characteristics:

1. Alarm relay: Excitation type a (normally closed), 100ma, 30vbc

2. Rir anti-white light interference: 6.550lux

3. Tamper switch (optional): front and rear cover tamper (normally closed) 25ma, 30vdc

4. Alarm output: excitation a type, 100vdcmax, 50madcmax (can be faster)

5. Operating temperature: 0 "c-49" c

6. Relative humidity: 5% - 95% (without frost)

7. Installation position: wall or corner 8. Detection range: 15mx1050

9. Microwave frequency: s band, 2.45 ghz

10. Radiated interference: 30v/m, 10mhz, 100mhz

11. Power supply: 10-14.5vdc, 35ma (typ)

(7) Gas leak detector (xsj-808)

characteristic:

1. Dual-probe multi-loop design ensures stable and reliable system operation;

2. The extremely low rate of false alarms stems from the multi-level processing technology of sensor materials, which enhances detector selectivity and effectively prevents various environmental disturbances such as soot and alcohol, and is particularly suitable for Chinese kitchens;

3. Multiple professional inspection processes in the manufacturing process to ensure quality;

4. Easy to install and maintain;

5. Passed the test of "National Gas Appliance Quality Supervision and Inspection Center" of China Ministry of Construction;

6. Follow the standards of the Ministry of Construction cj3057-1996 and the Ministry of Public Security ga127-1996.

Technical characteristics:

1. Inductive gas, natural gas, liquefied petroleum gas 2. Alarm concentration: Gas: 0.1-0.5% Natural gas: 0.1-0.3% Liquefied petroleum gas: 0.1-0.5%

3. Alarm volume: >60db