[China Aluminum Network] The aluminum ingots to be cut must be stuck firmly. When sawing aluminum ingots, the aluminum profile tooling design and production process can not go too fast and the temperature of the aluminum ingot should not be too high. The location of the lubricant should be correct and continuous. JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.zjsensorsled.com
When the saw blade does not completely stop rotating, it is strictly prohibited to clean the aluminum chips. The short head of the aluminum ingot should not be less than 20 mm, and it should be removed timely after the saw is stopped.
When the saw blade returns to its original position, the aluminum ingot can be continued to prevent the aluminum ingot from hitting the saw blade. Continuing ingots should not be placed under aluminum ingots.
Can aluminium sawing machine saw steel?
Need to buy a new saw blade, because the same saw blade after sawing steel in the saw aluminum alloy, aluminum alloy will have a lot of burrs, the saw blade is not so sharp.
Can a sawing machine replace the cut iron blade?
There are, but rarely are laser cutting machines, mostly still traditional. Suitable for sawing a variety of copper, copper alloys, iron, stainless steel, seamless steel, aluminum profile extrusion die design, training aluminum profiles and other metal pipe bar. 1. Semi-automatic type, manual feeding, automatic chucking, automatic sawing, 90° straight cut, 90°-30° left oblique cut, 90°-45° right oblique cut. 2, there is also automatic type , set by the programmable PLC program, automatic feeding.