Tempered glass has high resistance to wind, cold and heat, impact, etc. Even after crushing, it is a uniform, small particle, and the sharp corners left by the non-ordinary glass break. Even so, there is still tempered glass blew rate per thousand, in addition to the quality of tempered glass, the installation is rigorous but also to the important factor of security. Here we will introduce the characteristics of glass and how to reduce the risk of glass blew. First, the characteristics of tempered glass 1. Safety: If the glass breaks, the debris will resemble a honeycomb-shaped small, obtuse-angled particle that will not cause harm to the human body. 2, high strength: for the same thickness of toughened glass impact strength is 3 to 6 times that of ordinary glass, and bending strength is 3 to 6 times that of ordinary glass. 3, thermal stability: tempered glass has a strong thermal stability, the temperature difference is 3 times that of ordinary glass, can withstand 200 °C temperature changes. Second, how to reduce the risk of self-demolition of tempered glass 1, choose high quality toughened glass The minimum requirement for toughened glass is to ensure that the product has a 3C certification mark. In addition to wearing polarized sunglasses to see the glass, the tempered glass should have a colored streak, and there will be blue spots on the side with the naked eye; also pay attention to the curvature of tempered glass, The flatness is not as smooth as ordinary glass, it has a bumpy feel, and there will be a certain degree of curvature on the longer side. 2, affixed to the explosion-proof membrane Shower room tempered glass does not come with explosion-proof membrane, you have to manually affix the explosion-proof membrane, so as to prevent the glass from escaping when the debris flies, but in the choice of explosion-proof membrane to try to choose after the International Window Film Association certification, with production safety Film qualification explosion-proof membrane. 3, focus on the protection of the glass corner The middle part of the tempered glass is the strongest and the four corners are relatively weak. In this part, if the cracks appear, it is easy to smash the whole glass. We have not observed that the safety hammer mark on the bus window glass is located on the edge of the glass, which is the use of tempered glass. 4, to avoid sharp object scratches Although the strength of tempered glass is high, there are also weaknesses and it is feared that scratches and impacts will be caused by sharp things. Because the contact area of ​​the sharp object is small, the pressure of the contact point on the glass is relatively large, so that the glass is subjected to a large external force and causes slight cracking. Editor's summary: The characteristics of tempered glass and how to reduce the risk of self-detonation of tempered glass are introduced here, and I hope to help everyone. If you want to know more related knowledge, you can pay attention to this website, or you can visit our website offline experience directly. Tempered glass partition tempered glass High Viscosity Pump,Pump For High Viscosity Fluid,Pumps For Viscous Liquids,Viscosity Pump Hengshui Yuanhan Trading Co.,Ltd , https://www.hengshuiyuanhanpump.com
