1. The construction site should be kept clean and well ventilated, and should not be dusty. Grinding should be carefully carried out in the coating operation to make it smooth and smooth, so as to avoid rough surface of the coating. 2, when blending paint, should pay attention to the compatibility of the product, control the concentration of the paint, not too thin or too thick, the proportion of curing agent and thinner should be appropriate, when brushing (spray) paint, each should not be too thick and too heavy The time interval should be strictly controlled. The spray gun pressure and spray distance should be controlled during spraying. Avoid causing orange peel, falling, and ribbing. 3, when the putty putty, the action should be fast, clean and shaved, leaving no "wild putty." For oily putty, it is not advisable to reciprocate the scrape too much to prevent the oil from being squeezed out in the putty, which makes the paint film wrinkle. 4. When painting, the upper and lower heads of the doors and windows, the small faces of the hinges and the ends of the facing bead should be painted in place to prevent the oil workers from working after the woodworker is installed, resulting in a leaking brush. 5. When painting the paint, it is advisable to use a wool board brush. It is not advisable to use a brown brush. The paint should not be too thick to avoid obvious brush lines. 6. The construction of the rainy season should control the air humidity at the job site and can be tested with a hygrometer. When the humidity of the air is too high, a drier should be added to the paint to avoid whitening of the paint after the paint is finished. [Follow the WeChat public number "Jiuzheng Paint Network"; pay attention to surprises, scan code to view "If your husband is selling paint..." Jiuzheng Coating Network Exchange Group] Dead Blow Ball Pein Hammer,Ball Pein Hammer 16 Oz,12 Oz Ball Pein Hammer,One Piece Ball Pein Hammer CHANGZHOU YIYITOOLS FACTORY , https://www.czyiyitools.com
Decoration and decoration knowledge: quality problems should be paid attention to in the construction of wooden finishes
Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%CD%BF%C1%CF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })